Experimental Investigation of Thermal Performance of a Silicon Flat Plate Grooved Heat Pipe with an integrated heater and cooler

Date

2018-06-13

Author

Kurt, Cem
Alijani, Hossein
Çetin, Barbaros
Akkuş, Yiğit
Dursunkaya, Zafer

Metadata

Show full item record

Item Usage Stats

99
views

0
downloads

URI

https://hdl.handle.net/11511/76291

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental Investigation of Thermal Performance of an Aluminum Flat-Grooved Heat Pipe Aljanvad, Hossein; Çetin, Barbaros; Akkuş, Yiğit; Dursunkaya, Zafer (2017-08-31)
Experimental investigation of the effects of tip-injection on the aerodynamic loads and wake characteristics of a model horizontal axis wind turbine rotor Abdulrahim, Anas; Uzol, Oğuz; Department of Aerospace Engineering (2014) In this study, tip injection is implemented on a model Horizontal Axis Wind Turbine (HAWT) rotor to investigate the power and thrust coefficient variations as well as the wake characteristics. The model wind turbine has a 0.95 m diameter 3-bladed rotor with non-linearly twisted and tapered blades that has NREL S826 profile. The nacelle, hub and the blades are specifically designed to allow pressurized air to pass through and get injected from the tips while the rotor is rotating. The experiments are perform...
Experimental Investigation of the Wake Flow Field of a Model Wind Turbine Rotor with Tip Injection Abdulrahim, Anas; Anık, Ezgi; Uzol, Oğuz (2015-01-05)
Experimental Investigation of Optimal Gap Distance between Rotors of a Quadrotor UAV Kaya, Dilber Derya; Kutay, Ali Türker; Tekinalp, Ozan (2017-06-09) The effect of spacing between the rotors of a quadrotor Unmanned Aerial Vehicle (UAV) in hovering flight is investigated. Experiments are conducted to obtain a mathematical relation between the diameter of the rotor and gap distance between each rotor. Constraints such as the maximum thrust force and minimum energy consumption are imposed. Several rotors having different sizes are tested at various RPMs with a changing gap distances, and total thrust produced by four rotors is measured. The results are give...
Experimental investigation of micro grooved heat pipes on silicon and aluminum Alijani, Hossein; Çetin, Barbaros; Dursunkaya, Zafer (null; 2016-09-14) As the electronic components get more and more miniaturized, their thermal management becomes more and more challenging. High heat flux and requiring no moving parts are of benefits that has brought micro-grooved heat pipes as an effective heat removal method, to researchers’ attention in recent years. In current study, thermal performance of an array of 50 micro-grooved heat pipes fabricated on aluminum and filled with DI water is experimentally investigated; temperature distribution along the heat pipes i...

Citation Formats

C. Kurt, H. Alijani, B. Çetin, Y. Akkuş, and Z. Dursunkaya, “Experimental Investigation of Thermal Performance of a Silicon Flat Plate Grooved Heat Pipe with an integrated heater and cooler,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/76291.