Optimizing the Efficiency in AC Energy Transfer via a Stack of Four Coils Made of 2G HTS Tapes

Erdoğan, Muzaffer
Çiçek, Ahmet
Yıldız, Şükrü
Tunç, Serhat
Keysan, Ozan
İnanır, Fedai


Optimizing the Heat Treatment Parameters of Additively Manufactured IN718 Components
Kaleli, Tuğçe; Yağmur, Aydın; Tirkeş, Süha; Gür, Cemil Hakan (2021-9-01)
Ni-based superalloys have gained importance in aerospace and energy industries due to their excellent mechanical properties at elevated temperatures. Conventional manufacturing methods such as casting and forging create defects having adverse effects on the service performance. Moreover, microstructures of cast and wrought products contain brittle phases, which negatively affect the machinability. In recent years, additive manufacturing techniques have been developed for production of Ni-based super...
Optimizing transient and filtering performance of a C-type 2nd harmonic power filter by the use of solid-state switches
Gerçek, Cem Özgür; Ertaş, Arif; Department of Electrical and Electronics Engineering (2007)
In this research work, the performance of a C-type, 2nd harmonic power filter is optimized by the use of a thyristor switched damping resistor. In the design of conventional C-type, 2nd harmonic filters; the resistance of permanently connected damping resistor is to be optimized for minimization of voltage stresses on filter elements arising from switchings in transient state and for maximization of filtering effectiveness in the steady-state. Transformer inrush current during energization of power transfor...
Optimizing Reinforced Cantilever Retaining Walls Under Dynamic Loading Using Improved Flower Pollination Algorithm
TUTUŞ, EREN BURAK; Pekcan, Onur; Altun, Murat; Türkezer, Mehmet (Springer Singapore, 2021-01-01)
Optimized spacer layer thickness for plasmonic-induced enhancement of photocurrent in a-Si:H
Saleh, Z. M.; NASSER, H; ÖZKOL, E; GÜNÖVEN, M; Abak, Musa Kurtuluş; Canlı, Sedat; Bek, Alpan; Turan, Raşit (2015-10-24)
Plasmonic interfaces consisting of silver nanoparticles of different sizes (50-100 nm) have been processed by the self-assembled dewetting technique and integrated to hydrogenated amorphous silicon (a-Si:H) using SiNx spacer layers to investigate the dependence of optical trapping enhancement on spacer layer thickness through the enhancements in photocurrent. Samples illuminated from the a-Si:H side exhibit a localized surface plasmon resonance (LSPR) that is red-shifted with the increasing particle size an...
Optimizing the fenestration of typical Turkish school building with respect to daylight and thermal performance
Dilber Kılıçarslan, Damla; Elias Özkan, Soofia Tahira; Department of Building Science in Architecture (2013)
The aim of this study is the maximization of the occupant comfort with the minimization of the energy consumption for artificial lighting, heating and cooling in typical Turkish school buildings through the better design of the fenestrations which were predetermined with a directive called “Eğitim Yapıları Mimari Proje Hazırlanması Genel İlkeleri” i.e. the “General Principles For Preparing Architectural Projects For Educational Buildings” as a monotype regardless of orientation and climate. The study was co...
Citation Formats
M. Erdoğan, A. Çiçek, Ş. Yıldız, S. Tunç, O. Keysan, and F. İnanır, “Optimizing the Efficiency in AC Energy Transfer via a Stack of Four Coils Made of 2G HTS Tapes,” 2016, Accessed: 00, 2021. [Online]. Available: ices2016conference.com.