Development of an algorithm to determine the equilibrium temperature and composition of constant volume or constant pressure combustion products of a C-H-O-N-Ar system.

1981
Özgen, M Merih

Suggestions

Development of an elasto-plastic analytical model for design of grouted rock bolts in tunnels with particular reference to poor rock masses
Osgoui, Reza Rangsaz; Karpuz, Celal; Department of Mining Engineering (2007)
The analysis presented in this thesis provides a methodology for grouted bolts design, based on empirical and analytical methods. Hence, the main objectives of this thesis are to offer practical means for better characterisation of poor to very poor rock masses, to better predict support pressure, and to develop an elasto-plastic analytical model for design of grouted bolts in tunnels excavated in such rock masses. To improve the applicability of the GSI (Geological Strength Index) in poor to very poor rock...
Development of a generalized numerical solution for hydrodynamically lubricated elastic surfaces.
Yöney, Taner; Akkök, Metin; Department of Mechanical Engineering (1996)
Development of a pore network model and a neural network model to be coupled to simulate porous medium.
Karaman, Türker; Demiral, Birol M. R.; Department of Petroleum and Natural Gas Engineering (2002)
Development of a Parametric Equation to Predict the Joint Shear Strength
Burak Bakır, Burcu (American Society of Civil Engineers (ASCE), 2013-05-01)
This paper presents an analytical study that focuses on the development ofa parametric equation to predict the joint shear strength. In this analytical study, adatabase containing geometric properties, material strengths, configuration detailsand test results of reinforced concrete beam-to-column connection subassembliestested under cyclic loading is established. Then, based on the experimental results,parameters affecting joint shear capacity are determined. The most influentialparameters are selected and ...
Development of a novel enzyme immobilization technique and its application to continuous flow membrane reactor.
Arıca, Mehmet Yakup; Hasırcı, Vasıf Nejat; Department of Biology (1992)
Citation Formats
M. M. Özgen, “Development of an algorithm to determine the equilibrium temperature and composition of constant volume or constant pressure combustion products of a C-H-O-N-Ar system.,” Middle East Technical University, 1981.