Kırılganlık eğrileri kullanılarak elde edilen tahmini hasar dağılımının hasar tespit verileriyle karşılaştırılması

2017-10-13
Genellikle sismik risk değerlendirmelerinde kayıp ve hasarın tahmini için kullanılan kırılganlık eğrileri belirli bir ülke veya bölgede benzer özelliklere sahip yapı tipleri için oluşturulur. Bölgesel özellikleri esas alan kırılganlık eğrilerinin oluşturulması genel anlamda zor ve zahmetli bir iş olduğundan hasar ve kayıp tahminleri için çoğunlukla uluslararası çalışmalar sonucu oluşturulmuş mevcut kırılganlık eğrileri kullanılmaktadır. Oysa ülke veya bölge yapı stoğunu temsil etmeyen kırılganlık eğrilerinin kullanılması gerçekten uzak hasar ve kayıp tahminlerinin yapılmasına yol açabilir. Bu sebeple,bu çalışmada literatürde önerilen bazı kırılganlık eğrilerinin ülkemizdeki yapı stoğuna uygulanabilirliği değerlendirilerek, kullanılması önerilen kırılganlık eğrilerinin AFAD Başkanlığının yürüttüğü, Deprem Ön Hasar Tahmin Sistemine (AFAD-RED), dolayısı ile Afet Yönetim ve Karar Destek Sistemi (AYDES) ve Afet Risk Yönetim Sistemi (TAF-RISK) projelerine entegre edilmesi, güvenilir hasar ve kayıp tahmin senaryolarına dayalı planlamalar yaparak Türkiye Afet Müdahale Planı (TAMP) başta olmak üzere AFAD koordinasyonunda hazırlanacak diğer ulusal planlara (Risk Azaltma Planı, İyileştirme Planı) katkı sağlanması amaçlanmıştır. Çalışmada 8 Mart 2010 Elazığ Kovancılar depreminedeniyle bölgede yapılan hasar tespit çalışmaları sonucu ortaya çıkan hasar oranları ile yurt içi ve yurt dışı literatürde önerilen bazı kırılganlık eğrileri kullanılarak elde edilen tahmini hasar oranları karşılaştırılmıştır. Yapılan karşılaştırmaların sonucunda; hasar tespit oranları ile tutarlı hasar tahmin değerleri veren kırılganlık eğrileri belirlenmiştir. Bu eğrilerin Türkiye’deki benzer yapı sınıflarının bölgesel deprem hasar ve kayıp tahmini için kullanılmasının uygun olacağı değerlendirilmektedir.
4. Uluslararası Deprem Mühendisliği ve Sismoloji Konferansı, (11-13 Ekim 2017)

Suggestions

Estimating the Liquefaction Related Geotechnical Hazards in Probabilistic Seismic Hazard Assessment Framework
Gülerce, Zeynep (2016-06-26)
The objective of this study is to develop a performance-based earthquake engineering (PBEE) framework for the liquefaction-related hazards and estimate the hazard levels for liquefaction-related engineering demand parameters (EDPs) in a probabilistic manner. Two efficient, sufficient, and hazard compatible EDPs: probability of liquefaction (PL) and post-liquefaction settlement (δL) are selected. Seismic demand models that explain the relationship between these EDPs and ground motion IMs are employed in a se...
A study on fragility analyses of masonry buildings in Erzincan (Turkey) utilizing simulated and real ground motion records
Karim Zadeh Naghshineh, Shaghayegh; Askan Gündoğan, Ayşegül; Erberik, Murat Altuğ; Yakut, Ahmet (Elsevier BV; 2017-09-13)
Ground motion records are generally required to develop fragility curves which are utilized in seismic loss estimation studies for earthquake prone zones. These records could be 'real', i.e. recorded acceleration time series or 'simulated' records consistent with the regional seismicity and produced using alternative simulation techniques. This study mainly concentrates on development of fragility curves for masonry buildings located in Erzincan (eastern Turkey) using 'simulated' ground motion records and e...
Probabilistic assessment of earthquake insurance rates for important structures: Application to Gumusova-Gerede motorway
Yücemen, Mehmet Semih; ERDİK, MUSTAFA ÖZDER (Elsevier BV, 2008-01-01)
A probabilistic model is presented for the assessment of the earthquake insurance rates for important engineering structures, for which the seismic losses could be quite significant. The proposed model is used to estimate the earthquake insurance premiums for the structures taking place in the Bolu Mountain Crossing in the Gumusova-Gerede motorway Section, Turkey. The model requires two types of studies, namely: seismic hazard analysis and estimation of potential damage to structures based on damage probabi...
An approximate procedure for estimating the member demands in mid-rise reinforced concrete buildings
Akpinar, Ugur; Binici, Barış; Yakut, Ahmet; Tuncay, Kağan (Springer Science and Business Media LLC, 2020-01-01)
Seismic assessment of mid-rise reinforced concrete buildings is important for urban seismic risk reduction. Nonlinear time history analysis is the state-of-the-art analysis tool for this purpose. However, the number of such buildings may reach to several tens of thousands in metropolitan cities of earthquake prone countries. This necessitates faster yet sufficiently accurate assessment methods to mitigate the seismic risk. In this study, a simple and efficient approach is developed and validated for the ass...
Generation of fragility curves for Turkish masonry buildings considering in-plane failure modes
Erberik, Murat Altuğ (2008-03-01)
This study focuses on the seismic safety evaluation of masonry buildings in Turkey for in-plane failure modes using fragility curves. Masonry buildings are classified and a set of fragility curves are generated for each class. The major structural parameters in the classification of masonry buildings are considered as the number of stories, load-bearing wall material, regularity in plan and the arrangement of walls (required length, openings in walls, etc.), in accordance with the observations from previous...
Citation Formats
C. Çetin and M. A. Erberik, “Kırılganlık eğrileri kullanılarak elde edilen tahmini hasar dağılımının hasar tespit verileriyle karşılaştırılması,” presented at the 4. Uluslararası Deprem Mühendisliği ve Sismoloji Konferansı, (11-13 Ekim 2017), Eskişehir, Türkiye, 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/77934.