Design construction and preliminary testing machine.

1976
Khan, Shan Nawaz

Suggestions

Design construction and testing of aa new vane typee positive displacement pump.
Bamyacıoğlu, Ahmet; Department of Mechanical Engineering (1976)
Design assembly and calibration of an experimental setup for various optical measurements
Uzgel, Evren; Öke, Gülay; Department of Physics (2004)
The experimental setup which consisted of the Jarrell-Ash Ebert type scanning monochromator, the Hamamatsu Si PIN Photodiode, a PC connected ADC card and a Tungstenstriplamp operated at different temperatures was assembled. The different parts needing calibration were calibrated with spectral response calibration techniques suitable for our purposes and connected to the experimental setup in a proper way. Spectral response calibrations and transmission measurements in the range 450-800 nm were carried out.
Design implementation of an electrophysiological data acquisition and analysis system
Sezen, Kumsal Deniz; İder, Y.Ziya; Department of Electrical and Electronics Engineering (1991)
Design optimization of domestic unit heaters.
Barakat, Abdelwahab; Department of Mechanical Engineering (1973)
Design scaling of aeroballistic range models
Kutluay, Ümit; Balkan, Raif Tuna; Department of Mechanical Engineering (2004)
The aim of this thesis is to develop a methodology for obtaining an optimum configuration for the aeroballistic range models. In the design of aeroballistic range models, there are mainly three similarity requirements to be matched between the model and the actual munition: external geometry, location of the centre of gravity and the ratio of axial mass moment of inertia to the transverse mass moment of inertia. Furthermore, it is required to have a model with least possible weight, so that the required tes...
Citation Formats
S. N. Khan, “Design construction and preliminary testing machine.,” Middle East Technical University, 1976.