Predicting the critical properties of heptanes-plus in gas condensates: Genetic algorithms as an optimization tool

2004-01-01

Suggestions

Geometric tracking control of a fully actuated rigid body and applicatin to attitude control of a quadrotor UAV
Bashiri Bargoshadi, Vahid; Kutay, Ali Türker; Department of Aerospace Engineering (2014)
This work is the study of tracking control of rigid body in a general way using a geometric approach. To achieve globally valid characteristics, it is necessary to study such a control problem in its own natural nonlinear space using differential geometric properties of the space. By linking the tracking control problem to the problem of stabilization of a single equilibrium of an error dynamics, a tracking controller in the general case of a compact Lie groups has been developed. Then, using Lassale invari...
Integration of real-time and dynamic surveillance data in managing Azeri-Chirag-Guneshli field
Sadikhov, Samir; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2010)
By the evolving application of technology in the oil and gas fields, the volume of gathered information through the dynamic surveillance gets enormous. The importance is lying not only in the regular storage and standalone usage of such a big volume of data but also analyzing and integrating them in the light of alternative sources of data in order to turn the data to valuable field performance information. It is aimed to investigate role of the real time (bottom hole temperature gauges and distributed temp...
Determination of hydrate formation conditions of drilling fluids
Kupeyeva, Aliya; Parlaktuna, Mahmut; Department of Petroleum and Natural Gas Engineering (2007)
The objective of this study is to determine hydrate formation conditions of a multicomponent polymer based drilling fluid. During the study, experimental work is carried out by using a system that contains a high-pressure hydrate formation cell and pressure-temperature data is recorded in each experiment. Different concentrations of four components of drilling fluid, namely potassium chloride (KCl), partially hydrolyzed polyacrylicamide (PHPA), xanthan gum (XCD) and polyalkylene glycol (poly.glycol) were us...
Estimation of the formation temperature from the inlet and outlet mud temperatures while drilling geothermal formations
Tekin, Sema; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2010)
Formation temperature is an important parameter in geothermal drilling since it affects all the components of the system such as drilling fluid, drilling operations and equipment through mud temperatures. The main objective of this study is to estimate the formation temperatures of five geothermal wells in Germencik-Ömerbeyli geothermal field by using inlet and outlet mud temperatures obtained during drilling. For this purpose, GTEMP, a wellbore thermal simulation model is used to simulate the process of dr...
Critical evaluation of the energy resources of Turkey with respect to the world prospects
Aydemir, Mehmet Olcay; Mehmetoğlu, Mustafa Tanju; Department of Petroleum and Natural Gas Engineering (2010)
Existing petroleum and natural gas reserves, which are the major supplies of primary energy demand of the world, are cumulated in a few countries. This causes a serious supply security problem for many countries. On the other side, greenhouse gas emissions caused by mainly fossil fuels are gradually increasing to a point which jeopardizes the future of the earth. By now, countries have to consider both their supply security and this global environmental problem while planning their energy future. For Turkey...
Citation Formats
Ç. Sınayuç, “Predicting the critical properties of heptanes-plus in gas condensates: Genetic algorithms as an optimization tool,” Calgary; United States, 2004, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84957005597&origin=inward.