Analysis of E-plane metal insert filters in rectangular and cylindrical waveguides.

1987
Dinç, Ahmet
Show full item record
206
views
0
downloads
https://hdl.handle.net/11511/7907
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis of circular waveguides coupled by axially uniform slots
Öztürk, Mensur; Çağlayan, Fatih; Department of Electrical and Electronics Engineering (2006)
The characteristics of slotted circular waveguides with different dimensions, including cutoff frequencies of TE and TM modes, impedance and modal field distributions will be analyzed using the generalized spectral domain approach. The Method of Moment will be applied, basis functions that include the edge conditions will be used and a computer program will be developed. Obtained results will be presented for different number, depth and thickness of coupling slots, and compared with available data to demons...
Analysis of coupled lines in microwave printed circuit elements
Piroğlu, Şefika Özkal; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2007)
Full wave analysis of microstrip lines at microwave frequencies is performed by using method of moments in conjunction with closed-form spatial domain Green’s functions. The Green’s functions are in general Sommerfeld-type integrals which are computationally expensive. To improve the efficiency of the technique, Green’s functions are approximated by their closed-forms. Microstrip lines are excited by arbitrarily located current sources and are terminated by complex loads at both ends. Current distributions ...
Analysis of frames containing shear walls.
Akgün, Ömer Riza; Department of Civil Engineering (1974)
Analysis of edge-reinforced cantilever slabs for spine beam bridges.
Gunel, M. Halis; Department of Civil Engineering (1984)
Analysis of Field-Effect Passivation in Textured and Undiffused Silicon Surfaces
Turkay, Deniz; Koroglu, Cagil; Yerci, Selçuk (2019-09-13)
In this work, we present a numerical analysis comparing the field-effect passivation provided by fixed dielectric charges on planar and textured undiffused silicon surfaces. We focus particularly on the ratio of effective surface recombination velocities (S-eff) of planar and textured surfaces (sigma=S-eff,S-textured/S-eff,S-planar) utilizing the same fixed dielectric charge density (Q(f)) under the same injection conditions. To ensure a difference between the space-charge region profiles of textured and pl...
Citation Formats
A. Dinç, “Analysis of E-plane metal insert filters in rectangular and cylindrical waveguides.,” Middle East Technical University, 1987.
METU IIS - Integrated Information Service open@metu.edu.tr