Comparison of Gasketed Plate Heat Exchangers with Double Pipe Heat Exchangers

2010-07-14
Sert, İsmail Ozan
Sezer Uzol, Nilay
Güvenç Yazıcıoğlu, Almıla
Kakaç, Sadık

Suggestions

Comparison of multi-phase interleaved boost converters with various coupled inductor topologies
Gökmen, Raşit; Bostancı, Emine; Department of Electrical and Electronics Engineering (2022-2)
Multi-phase interleaved boost converters are widely used in high power applications thanks to their high efficiency, high power density, increased output power capability and low input current ripple features. However, increasing the phase number results in an increase in the overall volume of the converter. In order to reduce the volume of the converter, inductors in multi-phase interleaved boost converters can be coupled. For a two-phase interleaved boost converter, loosely-coupled inductor (LCI), close-c...
Comparison of Wake Models with Porous Disc Wake Profile Measurements
Hazaveh, Hooman Amiri; Bay, Ayşe; Aysan, M S; Yanık, Tahir; Yazdanpanah, Mahdi; Yığılı, İmge; Yağmur, A S; Perçin, Mustafa; Uzol, Oğuz (2019-06-20)
Comparison of alloyed and non-alloyed ohmic contacts in gan/algan hemt for ka band radar applications
Çakmak, Hüseyin; İmer, Muhsine Bilge; Department of Micro and Nanotechnology (2020-12-28)
Gallium Nitride (GaN) based High Electron Mobility Transistor (HEMT) is the most powerful alternative for high-power and high-frequency applications due to its unique material properties, such as high breakdown field, high electron drift velocity, high operation temperatures, high radiation resistance. Low ohmic contact resistance (Rc) is critical to enhancing the device performance at high frequency and high output power. Various metal stacks with different metal types have been reported in literature. Ann...
Comparison of continuous and pulsed pump and treat for mass transfer limited aquifers
Aksoy, Ayşegül (2004-01-01)
Comparison of Two Alternative Silicon-On-Glass Microfabrication Processes for MEMS Inertial Sensors
Torunbalci, M. M.; Tatar, E.; Alper, S. E.; Akın, Tayfun (2011-09-07)
This paper presents experimental comparison of a modified silicon-on-glass (M-SOG) process to a previously-reported classical SOG (C-SOG) process based on the use of SOI wafers, yielding a stress free < 111 > silicon structural layer with desired structure thickness. The basic difference between these processes is the sequence of the step at which the silicon microstructures are defined by DRIE, making M-SOG more robust against critical dimension (CD) variations. Overall, M-SOG provides a simple, high yield...
Citation Formats
İ. O. Sert, N. Sezer Uzol, A. Güvenç Yazıcıoğlu, and S. Kakaç, “Comparison of Gasketed Plate Heat Exchangers with Double Pipe Heat Exchangers,” 2010, Accessed: 00, 2021. [Online]. Available: http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleID=1618135.