MODULAR AXIAL-FLUX DIRECT DRIVE PERMANENT MAGNETGENERATOR FOR WIND TURBINE APPLICATIONS

Date

2018-03-23

Author

Başkaya, Aydın
Keysan, Ozan

Metadata

Show full item record

Item Usage Stats

35
views

0
downloads

URI

https://hdl.handle.net/11511/79912

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Modular Heat Sinks for Enhanced Thermal Management of Electronics Hoque, Muhammad Jahidul; Günay, Ahmet Alperen; Stillwell, Andrew; Gurumukhi, Yashraj; Pilawa-Podgurski, Robert C. N.; Miljkovic, Nenad (2021-06-01) Power electronics are vital for the generation, conversion, transmission, and distribution of electrical energy. Improving the efficiency, power density, and reliability of power electronics is an important challenge that can be addressed with electrothermal codesign and optimization. Current thermal management approaches utilize metallic heat sinks (HSs), resulting in parasitic load generation due to different potentials between electronic components on the printed circuit board (PCB). To enable electrical...
Modular Heat Sinks for Enhanced Thermal Management of Electronics Hoque, Muhammad Jahidul; Günay, Ahmet Alperen; Stillwell, Andrew; Gurumukhi, Yashraj; Pilawa-Podgurski, Robert; Miljkovic, Nenad (2019-10-09)
Modular fixture design for CNC machining centers Kılıçarslan, Yusuf; Dölen, Melik; Department of Mechanical Engineering (2019) A new modular fixturing system is developed for CNC machining centers in the content of this thesis study. In the proposed fixture, studies are carried on to manufacture precise parts for finish milling operations. Some workpieces are loaded in the proposed fixturing system by using relevant fixture elements. Forces and moments are investigated that are acting during the machining operation. The precision of the machined surfaces is estimated by using Monte-Carlo Simulation. In the experimental section of t...
Modular embedded system design / implementation for mechatronic education and research Nursal, Ali Özgü; Koku, Ahmet Buğra; Department of Mechanical Engineering (2007) In this thesis a modular embedded system for Mechatronics education and research is designed and implemented. Four types of control boards are manufactured and related software is developed at board and PC level. A star like topology is used for boards architecture. One bridge board is responsible for handling communication between the PC and all the other boards that are connected independently to that bridge board. For PC communication Universal Seial Bus (USB), for inter peripheral communication serial p...
Fully autonomous interface circuit for thermoelectric energy harvesting in wearable and IoT applications Hamed, Osouli Tabrizi; Muhtaroğlu, Ali; Sustainable Environment and Energy Systems (2018-9) IoT and wearable electronics are building blocks of the current and future monitoring technologies with numerous applications such as environmental monitoring, precision agriculture, healthcare, transportation and logistics, and smart buildings. Powering the IoT smart nodes is costly due to the existence of billions of these nodes in the technology roadmaps, and is not environmental friendly due to the use of chemical batteries with toxic substances. Eliminating batteries is therefore highly desirable. Full...

Citation Formats

A. Başkaya and O. Keysan, “MODULAR AXIAL-FLUX DIRECT DRIVE PERMANENT MAGNETGENERATOR FOR WIND TURBINE APPLICATIONS,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/79912.