Design and realization of microwave bandstop filters

Download
1989
Dengizek, A. Tevfik

Suggestions

Design and realization of mixed element broadband bandpass filters
Okşar, İrfan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2003)
Design and realization of microwave phase shifters
Yenidoğan, Atilla; Koç, S. Sencer; Department of Electrical and Electronics Engineering (1992)
Design and realization of high power low loss combiners
Suna, Gonca; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2013)
In recent high power microwave systems, power generation is commonly achieved by combining a bunch of transistor amplifier. Regarding the efficiency of power combining operation, insertion loss of the combiner is a critical parameter. In this thesis, several low loss power combiners, namely, microstrip Wilkinson combiner in 6-18 GHz frequency range, suspended stripline branchline couplers in 16.5-17.5 GHz frequency range and finally, planar probe coaxial waveguide combiners in 8.5- 11.5 GHz and 15.5-17.5 GH...
Design and realization of broadband instantaneous frequency discriminator
Pamuk, Gökhan; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (2010)
n this thesis, RF sections of a multi tier instantaneous frequency measurement (IFM) receiver which can operate in 2 – 18 GHz frequency band is designed, simulated and partially realized. The designed structure uses one coarse tier, three medium tiers and one fine tier for frequency discrimination. A novel reflective phase shifting technique is developed which enables the design of very wideband phase shifters using stepped cascaded transmission lines. Compared to the classical phase shifters using coupled ...
Design and implementation of wideband stripline circulators
Dayanıklı, Gökçen Yılmaz; Demir, Şimşek; Department of Electrical and Electronics Engineering (2012)
Ferrite circulators are crucial elements for T/R modules of RADAR systems. Unlike many other mature devices, ferrite circulators have not been replaced by IC devices and have been used in T/R modules since 60s because of two main reasons. Firstly, they do not require environmental elements like capacitors or inductors unlike IC devices. Secondly, their performance is superior in terms of insertion loss, matching and isolation. Basically, they are used for the aim of the discrimination of the incoming and ou...
Citation Formats
A. T. Dengizek, “Design and realization of microwave bandstop filters,” Middle East Technical University, 1989.