Characterization of transverse anisotropy in Poisson’s ratio using radial deformation measurements

Date

2019-06-26

Author

Toker, Nabi Kartal

Metadata

Show full item record

Item Usage Stats

53
views

0
downloads

URI

https://www.e3s-conferences.org/articles/e3sconf/pdf/2019/18/e3sconf_isg2019_02006.pdf
https://hdl.handle.net/11511/82421

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Characterization of transverse anisotropy in Poisson’s ratio using three-point radial deformation measurements Toker, Nabi Kartal (2019-06-26) Poisson's ratio (v) of rock specimens can be experimentally determined from radial deformation measurements in an unconfined compression test. This is commonly achieved by mounting a compressometer with diametric or perimetric measurement capability, both of which assume the specimen cross-section remains a circle. If there is anisotropy among the horizontal directions, this assumption fails and measurements err. In this study, a compressometer with three radial deformation measurements is developed. The ac...
CHARACTERIZATION OF VISCOELASTIC PROPERTIES OF INDIVIDUAL RICE GRAIN BY MEASURING MECHANICAL IMPEDANCE Mert, Behiç (Wiley, 2009-02-01) The viscoelastic properties of individual rice grains were measured by using a novel oscillatory squeezing instrument. Specifically, rice grains at different moisture contents and cooking durations were chosen as the model grain, and their viscoelastic characteristics, namely viscous modulus and elastic modulus, were determined. During the measurement, the grains were squeezed between a rigid bottom plate and a top round element oscillating at random frequencies in the range of 10-30,000 rad/s. The mechanic...
Characterization of flow regime in concentric annuli and pipes for yield-pseudoplastic fluids Gucuyener, IH; Mehmetoglu, T (1996-09-01) This paper presents an analysis of the laminar-turbulent transition for flow of yield-pseudoplastic fluids in pipes and concentric annuli. The yield-pseudoplastic rheology is represented by the three-parameter Robertson-Stiff model, A modified Reynolds number is developed based on an equivalent diameter including characteristic parameters of the flow situations under consideration. Using the literature data, Hanks' theory of laminar flow stability is reanalyzed in comparison with other correlations. On acco...
Characterization of cross-coupling in capacitive micromachined ultrasonic transducers Bayram, Barış; Yaralioglu, GG; Oralkan, O; Lin, DS; Zhuang, XF; Ergun, AS; Sarioglu, AF; Wong, SH; Khuri-Yakub, BT (2005-01-01) This paper analyzes element-to-element and cell-to-cell cross-coupling in capacitive micromachined ultrasonic transducers (cMUTs) using an interferometer. In a 1-D linear cMUT array immersed in oil, a single element was excited, and membrane displacements were measured at different positions along the array with an interferometer. Electrical measurements of the received voltage on each array element were also performed simultaneously to verify the optical measurements. The array was then covered with a poly...
Characterization of a Glow Discharge Detector With Terahertz Time Domain Spectroscopy Cinar, Kamil; Bozaci, Hasan Mert; Altan, Hakan (Institute of Electrical and Electronics Engineers (IEEE), 2013-07-01) Recently, there has been much interest in the capability of low cost glow discharge detectors (GDDs) for detection of terahertz radiation. To utilize them in applications such as terahertz imaging these studies have typically focused on the response of the GDD at specific frequencies. To better understand the spectral behavior of glow discharges, we examine the interaction mechanism of GDDs with terahertz radiation using terahertz time domain spectroscopy in a broader range of frequencies between 0.05 and 0...

Citation Formats

N. K. Toker, “Characterization of transverse anisotropy in Poisson’s ratio using radial deformation measurements,” 2019, Accessed: 00, 2021. [Online]. Available: https://www.e3s-conferences.org/articles/e3sconf/pdf/2019/18/e3sconf_isg2019_02006.pdf.