Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis

2009-06-12
Şimşir, Caner
Hoffmann, F
Zoch, W
Wolff, M
Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis", Proceedings of the New Challenges in Heat Treatment and Surface Engineering (CHTSE), Dubrovnik, Hırvatistan, 9 - 12 Haziran 2009

Suggestions

Simulation of through hardening of SAE 52100 steel bearings part I determination of material properties
Müstak, Ozan; Şimşir, Caner (null; 2015-09-23)
Evaluation of Site Characterizations and Site Effects of the Ankara Basin Turkey
Koçkar, Mustafa Kerem; Akgün, Haluk (2007-06-28)
The purpose of this study is to assess the in-situ site characteristics and to perform seismic hazard studies of the Upper Pliocene to Pleistocene fluvial and Quaternary alluvial and terrace deposits located towards the west of Ankara. Based on a general engineering geological, geotechnical and seismic characterization of the site, site classification systems were assigned for seismic hazard evaluations. Then, short-period noise recordings of the microtremor measurements at the ground surface have been used...
Investigation of haptic manipulators with linear equations of motion
Kızılbey, Aras; Soylu, Reşit; Department of Mechanical Engineering (2019)
In this thesis, linearization of the equations of motion of haptic interfaces and the effects of such linearization on haptic applications are examined. Three and six DOF configurations of the Phantom Premium™ 1.5 have been selected as the haptic manipulators to be investigated. By utilizing the generic computer code that has been developed for hybrid manipulators composed of revolute and prismatic joints, the equations of motion for the aforementioned two haptic manipulator types are derived in symbolic fo...
Optimization of Selective Electrophoretic Deposition and Isostatic Compression of Titania Nanoparticles for Flexible Dye-Sensitized Solar Cells
Kocaoglu, Bahadir Can; Icli, Kerem Cagatay; Özenbaş, Ahmet Macit (2016-04-01)
Flexible photoanodes on PEN/PET based substrates for dye-sensitized solar cells (DSSC) by using electrophoretic deposition (EPD) method for the formation of titania nanoporous layer with titania nanoparticles (P-25) were produced. Considering commercially available titania nanoparticles containing both anatase and rutile phases, the undesired rutile nanoparticles, for DSSC applications, were almost eliminated from the coatings by selective pH adjustment of the EPD solutions without any binders. The coating ...
Determination of mechanical properties of hybrid fiber reinforced concrete
Yurtseven, Alp Eren; Tokyay, Mustafa; Department of Civil Engineering (2004)
Fiber reinforcement is commonly used to provide toughness and ductility to brittle cementitious matrices. Reinforcement of concrete with a single type of fiber may improve the desired properties to a limited level. A composite is termed as hybrid, if two or more types of fibers are rationally combined to produce a composite that derives benefits from each of the individual fibers and exhibits a synergetic response. This study aims to characterize and quantify the mechanical properties of hybrid fiber reinfo...
Citation Formats
C. Şimşir, F. Hoffmann, W. Zoch, and M. Wolff, “Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis,” presented at the Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis”, Proceedings of the New Challenges in Heat Treatment and Surface Engineering (CHTSE), Dubrovnik, Hırvatistan, 9 - 12 Haziran 2009, Dubrovnik, Hırvatistan, 2009, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/82723.