Simulation of through hardening of SAE 52100 steel bearings part I determination of material properties

2015-09-23
Müstak, Ozan
Şimşir, Caner
5th International Conference on Distortion Engineering (IDE2015), (23 - 25 Eylül 2015),

Suggestions

Simulation of Through Hardening of SAE 52100 Steel Bearings Part II Validation at Industrial Scale
Evcil, Elif; Müştak, Ozan; Şimşir, Caner (null; 2015-09-23)
In this study, the material dataset presented in part I of this article is validated at industrial scale in batch through‐hardening of bearing races. The material dataset acquired is implemented in a commercial heat treatment simulation software. Heat transfer coefficients for the oil and salt bath are determined by using a commercial standard quench probe. Zone temperatures and transfer times of the roller‐belt furnace are measured directly from the system.Through‐hardening of inner ring (IR) of 6813 beari...
Prediction of distortions in through hardening of cylindrical steel workpieces by dimensional analysis
Şimşir, Caner; Hoffmann, F; Zoch, W; Wolff, M (null; 2009-06-12)
Investigation of layered-spaced and oblique mild steel targets against 7.62 mm AP projectile
Çakır, Muhammed; Yıldırım, Raif Orhan; Department of Mechanical Engineering (2017)
Ballistic resistance of steel targets is important due to its common application to the safety of personnel, shelters for arms and military vehicles. Protective systems should provide a safer condition against possible threats by reducing the weight and the volume they occupy. This causes the total weight of the armor to decrease and increases the mobility of armored vehicle. This study concerns behavior of metallic plates that are spaced and obliquely arranged in order to increase ballistic resistance agai...
Modelling and simulation of power steering system for agricultural tractors
Gültekin, İdil İlke; Cömert, Samet A; Erkal, Gül; Ünlüsoy, Yavuz Samim; Balkan, Raif Tuna (null; 2016-10-11)
This paper presents the development of models for the hydraulic and mechanical parts of the power steering system of an agricultural tractor. The hydraulic model is built using the component blocks from the Fluids toolbox of the Matlab/Simulink platform. The hydraulic part of the model is then integrated with the mechanical model of the front axle developed using the SimMechanics toolbox. The modeling procedure of the hydraulic system, containing a steering control unit, is described. The overall model allo...
Numerical simulation of saltwater intrusion in tripoli, Libya
Sadeg, Saleh Ali; Karahanoğlu, Nurkan; Department of Geological Engineering (1996)
Citation Formats
O. Müstak and C. Şimşir, “Simulation of through hardening of SAE 52100 steel bearings part I determination of material properties,” Bremen, Almanya, 2015, p. 456, Accessed: 00, 2021. [Online]. Available: www.distortion-engineering.de.