Analysis and Design of Spherical Rectangular Printed Antenna Arrays

2016-06-26

Suggestions

Analysis and design of wideband antenna arrays
Çapraz, Kenan; Alatan, Lale; Department of Electrical and Electronics Engineering (2014)
Two methods of wideband array design are studied. The aim of this study is to investigate arrays with aperiodic spacings which are designed with these methods in order to obtain wideband behavior. These methods are genetic algorithm and wavelength scaled arrays that have active regions with variable interelement spacings. Genetic algorithm is utilized for array antennas with aperiodic spacing to optimize sidelobe levels of the antenna array in wide frequency band. Wavelength scaled spacing concept in design...
Analysis and design of cylindrically conformal microstrip antennas
Taşoğlu, Ali Özgür; Dural Ünver, Mevlüde Gülbin; Department of Electrical and Electronics Engineering (2011)
Cylindrically conformal microstrip antennas are investigated. Two different structures, namely proximity coupled and E-shaped microstrip antennas are analyzed and information about the design parameters is obtained by means of parametric study. With these structures, cylindrical arrays, having omnidirectional radiation in the circumferential plane of the cylinder, are designed. Proximity coupled cylindrical arrays operate in the 2.3-2.4 GHz aeronautical telemetry band with approximately 4% bandwidth. On the...
Analysis and design of microstrip patch antennas with arbitrary slot shapes
Şener, Göker; Alatan, Lale; Kuzuoğlu, Mustafa; Department of Electrical and Electronics Engineering (2011)
A new method is proposed that provides simple and effcient design and analysis algorithm for microstrip antennas with arbitrary patch shapes. The proposed procedure uses the mutiport network model (MNM) where the antenna is considered as a cavity bounded by perfect electric conductors on the top and the bottom surfaces and perfect magnetic conductor on the side surfaces. Ports are defined along the periphery of the patch, and the impedance matrix representing the voltage induced at one port due to a current...
Analysis and design of active annular ring coupled circular patch antenna
Gebeşoğlu, Durmuş; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2017)
This thesis includes the design, production and measurement of the active, dual band annular ring coupled circular patch antenna. The dual band operation is achieved by using stacked patches. 3 dB hybrid is used to obtain circular polarization. Effects of antenna parameters on the input impedance and frequency ratio between the resonance frequencies are observed. Design has been achieved step by step. Firstly, dual band operation is investigated by using stacked patches. An annular ring antenna and a circul...
Analysis and design of reactively loaded dual band microstrip antenna
Bayram, Caner; Koç, Seyit Sencer; Department of Electrical and Electronics Engineering (2015)
This thesis includes the design, production and measurement of a reactively loaded microstrip patch antenna. The dual band and circular polarization operation are achieved through the use of narrow slots etched close to the radiating edges on a nearly square patch. During the design process, the effects of antenna parameters on the input impedance and axial ratio characteristics are investigated. A step-by-step procedure is followed during the design process. First, the dual band characteristic is investiga...
Citation Formats
O. Demir and M. G. Dural Ünver, “Analysis and Design of Spherical Rectangular Printed Antenna Arrays,” 2016, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/83584.