Passive Vibration Isolation of Jet Aircraft Avionics Equipment

2019-09-20
Yaman, Yavuz
Show full item record
104
views
0
downloads
https://hdl.handle.net/11511/84096
Unverified, Conference / Seminar

Suggestions

Active vibration control of a smart sandwich plate via piezoelectric sensors and actuators
Aksoy, Yunus Tansu; Şahin, Melin; Department of Aerospace Engineering (2015)
In this study, the first three vibration modes of a smart sandwich plate, which are 1st out-of-plane bending, 1st torsion and 2nd out-of-plane bending modes, are aimed to be suppressed by using active vibration control techniques comprising a pole placement controller. Smart sandwich plate is composed of a passive sandwich composite plate and piezoelectric patches (PZT Lead-Zirconate-Titanate) attached with epoxy adhesive at specific locations determined by using finite element modelling and analysis. Those...
Passive damping and seismic isolation steel devices with displacement-dependent hardening
Dicleli, Murat (null; 2018-02-02)
In this paper, a summary of analytical and experimental studies into the behaviour of a new hysteretic damper and a seismic isolator designed for seismic protection of structures is presented. The Multi-directional Torsional Hysteretic Damper (MRSD) and its isolator version MARTI (Multi-Directional Adaptive Torsional Isolator) are patented inventions in which a symmetrical arrangement of identical cylindrical steel cores is so configured as to yield in torsion while the structure experiences planar movement...
Passive Cooling Assembly for Flat Panel Displays with Integrated High Power Components
Tarı, İlker (2009-08-01)
Passive cooling of flat panel display designs with integrated high power components is investigated with the help of recently available semi-emprical and CFD based heat transfer correlations. A heat-spreader-heat-sink assembly is proposed for effective external natural convection cooling of the display panel. A flat vertical surface and plate finned heat sinks with various fin heights are considered as heat sinks in the assembly. Heat dissipation limits for both types of heat sinks are determined for variou...
Active vibration control of smart structures
Ülker, Demet Fatma; Yaman, Yavuz; Nalbantoğlu, Volkan; Department of Aerospace Engineering (2003)
The purpose of this thesis was to design controllers by using H^ and yn control strategies in order to suppress the free and forced vibrations of smart structures. The smart structures analyzed in this study were the smart beam and the smart fin. They were aluminum passive structures with surface bonded PZT (Lead-Zirconate-Titanate) patches. The structures were considered in clamped-free configuration. The first part of this study focused on the identification of nominal system models of the smart structure...
Active Vibration Control of Smart Plates by Using Piezoelectric Actuators
Yaman, Yavuz; Volkan, Nalbantoğlu; Fatma Demet, Ülker; Eswar, Prasad; Davıd, Waechter; Bın, Yan (null; 2002-06-03)
Theoretical and experimental results of the modeling of a smart plate is presented for active vibration control. The smart plate consists of a rectangular aluminum plate modeled in cantilever configuration with surface bonded piezoelectric patches. The patches are symmetrically bonded on top and bottom surfaces. The study uses ANSYS (v.5.6) software to derive the finite element model of the smart plate. By using this model, the study first gives the influences of the actuator placement and size on the resp...
Citation Formats
Y. Yaman, “Passive Vibration Isolation of Jet Aircraft Avionics Equipment,” 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84096.
METU IIS - Integrated Information Service open@metu.edu.tr