Implementation of a prototype thyristorized reactive power compensator

Download
003591.pdf
1988
Pişkin, M Sadık
Show full item record
66
views
0
downloads
https://hdl.handle.net/11511/8442
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Implementation of a multiband excitation speech coder
İnevi, Mete; Demirekler, Mübeccel; Department of Electrical and Electronics Engineering (1999)
Implementation of a data acquisition system for contactless conductivity imaging
Ulker, B; Gençer, Nevzat Güneri (2002-09-01)
A data acquisition system is realized for conductivity imaging via contactless measurements. It is observed that field profiles are good representatives of the conductive objects scanned by the measurement system. Three different data sets are taken with different scanning resolutions. Note that although the scanning resolution is decreased 25 times, it is still possible to observe the conductive object. The data acquisition time is due to the data acquisition time limit of the lock-in amplifier. As might b...
Implementation of a data acquisition system for contactless conductivity imaging
ULKER, B; Gençer, Nevzat Güneri (2001-10-28)
A data acquisition system is realized to image electrical conductivity of biological tissues via contactless measurements. This system uses magnetic excitation to induce currents inside the body and measures the magnetic fields of the induced currents. A magnetically coupled differential coil system is scanned on the conductive object by a computer controlled scanning system. A data acquisition system is constructed using a PC controlled lock-in amplifier. 1.64V secondary voltage difference can be measured ...
Implementation of a digital signal synthesizer with high spurious free dynamic range
Kılıç, Argun; Yılmaz, Ali Özgür; Department of Electrical and Electronics Engineering (2006)
Today’s analog modulators and upconverters are inadequate to synthesize and modulate signals with high ‘Spurious Free Dynamic Range’ (SFDR). Thus, the main objective of this thesis is to design and implement a ‘Digital Signal Synthesizer’ (DSS) that is capable of synthesizing signals between 50-100 MHz with 60dB SFDR and to modulate them variable symbol rates and modulation techniques with very high phase/frequency resolution and switching speed while keeping the amplitude modulation occurring during a modu...
Implementation of Dirlik s damage model for the vibration fatigue analysis
Demirel, İsmail Gürzap; Kayran, Altan (2019-01-01)
Citation Formats
M. S. Pişkin, “Implementation of a prototype thyristorized reactive power compensator,” Middle East Technical University, 1988.
METU IIS - Integrated Information Service open@metu.edu.tr