Experimental Investigation of Gold 111 Surface Modified with Carboranethiol Self Assembled Monolayers



Experimental investigation of Gold 111 surface modified withCarboranthiol self assembled monolayer
Yavuz, Adem; Sohrabnıa, Nıma; Yılmaz, Ayşen; Danışman, Mehmet Fatih (null; 2015-08-24)
Experimental Investigation of Strength of Curved Beam by Thin Ply Non-Crimp Fabric Laminates
Arca, M. A.; PAPİLA, MELİH; Çöker, Demirkan (2016-06-09)
Resistance against delamination failure and through the thickness tensile properties of curved carbon fiber reinforced plastics composites are investigated experimentally by conducting the curved beam strength tests. Effect of novel material thin ply non crimp fabric (NCF) architecture on delamination resistance of carbon fiber reinforced composites are investigated and compare with that of standard UD layups. In order to determine through the thickness tensile properties of curved carbon fiber composites, ...
Experimental Investigation of Transformation Plasticity of SAE 52100 Bearing Steel
Şimşir, Caner; Davut, Kemal; Gür, Cemil Hakan (null; 2014-01-01)
Experimental investigation of cuttings transport in horizontal wells using aerated drilling fluid
Gül, Sercan; Parlaktuna, Mahmut; Kuru, Ergün; Department of Petroleum and Natural Gas Engineering (2017)
A new experimental approach has been introduced in this thesis for the cuttings transport in horizontal wellbores with the introduction of drag reducers into the aerated drilling fluids. Advanced Flow Loop System (annular test section of 21 ft. long 2.91-in. ID transparent casing and 1.85 in. OD inner drill pipe) in Middle East Technical University Petroleum and Natural Gas Engineering Department have been used for the experiments. The liquid phase has been water and water-PHPA copolymer mixture where the g...
Experimental investigation on chloroprene and acrylonitrile butadiene rubber types reinforced with nano-materials
Doğan, Özge; Esat, V.; Bal, B. (IOP Publishing, 2019-08-01)
In this research, the effects of three different nano-materials (Nano-Carbon Black, Nano-ZnO, and Multi-Walled Carbon Nanotubes (MWNTs)) on two different rubber types (Chloroprene Rubber (CR), and Acrylonitrile Butadiene Rubber (NBR)) were experimentally investigated. In order to achieve this purpose, mechanical tests and detailed aging tests (in air, oil and fuel) were conducted conforming to international standards. Three different nano-materials were added to rubber with different combinations. A good di...
Citation Formats
A. Yılmaz and M. F. Danışman, “Experimental Investigation of Gold 111 Surface Modified with Carboranethiol Self Assembled Monolayers,” 2015, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84643.