Recept on of standard time-signal for the synchronization of TRT timing

Download

012838.pdf

Date

1991

Author

Erülker, Turgut

Metadata

Show full item record

Item Usage Stats

103
views

0
downloads

URI

https://hdl.handle.net/11511/8503

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Receptance coupling based algorithm for the identification of contact parameters at holder-tool interface Matthias, W.; Özşahin, Orkun; Altintas, Y.; DENKENA, B. (Elsevier BV, 2016-05-01) To identify stable cutting conditions with a high depth of cut, stability lobe diagrams are used. In order to predict these diagrams, frequency response functions (FRF) at the tool tip are required for every tool, holder and machine combination. To reduce the number of experimental tests, receptance coupling substructure analysis (RSCA) is proposed in the literature. In order to take full advantage of this method, contact parameters between holder and tool must be known. To identify these parameters this pa...
RECURRENT LOGARITHM ADC BASED ON BRIGGS METHOD Alıyev, Tahmasıb (Springer Science and Business Media LLC, 1991-07-01)
Receptances of non proportionally and continuously damped plates equivalent dampers method Özgüven, Hasan Nevzat (1981-05-01) A method for the dynamic analysis of continuously and non-proportionally damped plates is discussed. The method is quite general and suitable for various damping treatments, such as in multilayer plates with damping layers. The transverse vibrations of partially coated plates under harmonic excitation are analyzed by the proposed method. The results of the undamped modal analysis made by classical finite element methods are used in the suggested lumped parameter analysis. The receptance matrices of coated p...
Receptances of non proportionally and continuously damped plates Reduced dampers method Özgüven, Hasan Nevzat (Elsevier BV, 1982-12-01) This paper presents a method for the dynamic analysis of continuously and non-proportionally damped plates in bending modes. The damping can be in the form of constrained or unconstrained layers. The method is an extension of the equivalent dampers method discussed in a previous paper, in which the damping matrix of a discretized plate is replaced by a diagonal equivalent damping matrix. Each diagonal element represents an equivalent damper inserted between the structure and ground. In this method the numbe...
Implemetation of reed-solomon encoder and decoder using TM32010. Atmaca, Fikri; Department of Electrical Engineering (1987)

Citation Formats

T. Erülker, “Recept on of standard time-signal for the synchronization of TRT timing,” Middle East Technical University, 1991.