Material Performance of Co3O4 CeO2 and Co Ce Mixed Oxide on Oxygen Storage for Solar Thermal Hydrogen Production

Çalışan, Atalay
Kaya, Denız
Üner, Deniz


Material Characterization of Amorphous Molybdenum Oxide Thin Films
Güllü, Hasan Hüseyin; Bayraklı, Özge; Terlemezoğlu, Makbule; Parlak, Mehmet (null; 2018-06-17)
Material requirements planning implementation for a foundry.
Talu, Selim; Department of Industrial Engineering (1985)
Material flow control in high pressure sheet metal forming of large area parts with complex geometry details
Trompeter, M; Onder, E; Homberg, W; Tekkaya, E; Kleiner, M (2005-12-01)
Working media based forming processes show advantages compared to the conventional deep drawing in the range of sheet metal parts with complex geometry details. By High Pressure Sheet Metal Forming (HBU), complex parts can be formed with reduced tool costs, fewer process steps, and improved part properties, particularly by the use of high strength steels. In order to use these advantages to full capacity, the material flow into the area of the geometry details needs to be optimised. The key element for the ...
Material characterization with terahertz time-domain spectroscopy
Köseoğlu, Devrim; Bilikmen, Kadri Sinan; Department of Physics (2010)
Terahertz time-domain spectroscopy systems were developed and used for the anaylsis and characterization of various materials. By using ultra-fast Ti:Sapphire and Er-doped fiber lasers, terahertz time-domain spectrometers of different configurations were constructed and tested. To increase the accuracy and sensitivity of the measurements, the systems were optimized for spectroscopic analysis. MBE grown nominally undoped epitaxial GaAs samples were used for the spectroscopic measurements. These samples were ...
Mechanical Performance of Resol Type Phenolic Resin/Layered Silicate Nanocomposites
Tasan, C. Cem; Kaynak, Cevdet (Wiley, 2009-03-01)
Clay addition has been shown to affect polymer resins positively in terms of several physical and chemical properties, including mechanical performance, high temperature endurance and durability. These increases are limited only to relatively low concentrations of reinforcement phase, but at these low concentrations polymer/layered silicate nanocomposites (P/LS NC) have shown to exhibit higher mechanical performance than fiber reinforced polymer composites. This is among the several reasons that make P/LS N...
Citation Formats
A. Çalışan, D. Kaya, and D. Üner, “Material Performance of Co3O4 CeO2 and Co Ce Mixed Oxide on Oxygen Storage for Solar Thermal Hydrogen Production,” 2015, Accessed: 00, 2021. [Online]. Available: