A study on the performance the CdZnxTe1-x radiation detectors grown by vertical gradient freeze (VGF) technique

Bender, Deniz
Turan, Raşit
Ünalan, Ayşe Merve
Ünal, Mustafa
Balbaşı, Özden Başar
Yılmaz, Ercan


A numerical study on MHD mixed convection flow
Bozkaya, Canan (null; 2014-09-02)
A DFT Study of Ethylene Hydrogenation Reaction Mechanisms on Ni-13 Nanocluster
Yilmazer, N. D.; FELLAH, MEHMET FERDİ; Önal, Işık (2013-06-01)
Metal nanoclusters can potentially exhibit high catalytic activity and selectivity due to not only a high number of exposed surface atoms but also active sites with different coordination numbers as compared to bulk catalyst surface. In this study ethylene hydrogenation was used as a model reaction in an effort to elaborate reactivity of small Ni nanoclusters and the ethylene hydrogenation reaction mechanism. Two mechanistic pathways; representing Eley-Rideal and Horiuti-Polanyi type of mechanism for ethyle...
A Modeling Study on the Layout Impact of with-in-die Thickness Range for STI CMP
Kıncal, Serkan; BAŞIM DOĞAN, GÜL BAHAR (2012-10-01)
Chemical Mechanical Planarization process has a proven track record as an effective method for planarizing the wafer surface at multiple points of the semiconductor manufacturing flow. One of the most challenging aspects of the CMP process, particularly in applications like Shallow Trench Isolation (STI), is the difference in relative removal rates of the different materials that are being polished. A certain amount of over-polish is required to clear oxide on top of the nitride, however, this over-polish m...
A parametric study on processing of scratch resistant hybrid sol-gel silica coatings on polycarbonate
Yavas, Hakan; Selcuk, C. Duygu Ozturk; Ozhan, A. E. Sinan; Durucan, Caner (2014-04-01)
Scratch resistant silica-based hybrid coatings on polycarbonate substrates were formed by dip-coating of acid-catalyzed tetramethyl ortohosilicate (TMOS): diethylenetriamine (DETA): H2O:2-propanol sols. The sol formulation and dip-coating process parameters on microstructural and performance properties-here optical transmittance and scratch resistance-of the coatings were evaluated. The effect of water quantity, total aqueous component (H2O + 2-propanol) amount and relative proportion of TMOS: DETA on film ...
A numerical study on local buckling and energy dissipation of CHS seismic bracing
Kusyilmaz, Ahmet; Topkaya, Cem (Elsevier BV, 2011-08-01)
Seismic provisions for steel buildings present limiting width-thickness and slenderness ratios for bracing members, most of which were established based on experimental observations. A finite element study has been undertaken to evaluate these limits for pin-ended circular hollow section (CHS) steel braces. Uncertainties in modeling and quantification arise in the simulation of cyclic brace buckling. A finite element modeling procedure was developed and calibrated using existing experimental data. Sensitivi...
Citation Formats
D. Bender, R. Turan, A. M. Ünalan, M. Ünal, Ö. B. Balbaşı, and E. Yılmaz, “A study on the performance the CdZnxTe1-x radiation detectors grown by vertical gradient freeze (VGF) technique,” 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/85666.