Numerical analysis of temperature distribution of superconducting coil stack

İnanır, Fedai
Bak, Bekir
Yıldız, Şükrü
Keysan, Ozan
In this study, magneto-thermal studies were carried out by solving Ampere and heat conduction equations together in superconducting coil stacks wounded by coated conductors. The coil stack used in the calculations consists of 4 bobbins in the solenoidal structure and each bobbin has 100 windings. Coated conductors are 12mm in width, 100 µm in thickness and has 100 A critical current density. The two-dimensional temperature distributions of the coil stack for different current amplitudes were obtained. The effect of the distance between the coils and the frequency of the applied current on the coils temperature was investigated. As the current amplitudes increases, the temperature in the coils increases and as the distance between the coils increases, the temperature decreases.
ISMSIT 2017 1 st International Symposium on Multidisciplinary Studies and Innovative Technologies (November 2-4, 2017)


Kirez, Oguz; Güvenç Yazıcıoğlu, Almıla; KAKAÇ, SADIK (2012-11-15)
In this study, a numerical analysis of heat transfer enhancement of Alumina/water nanofluid in a steady-state, single-phase, laminar flow in a circular duct is presented for the case of constant wall heat flux and constant wall temperature boundary conditions. The analysis is performed with a newly suggested model (Corcione) for effective thermal conductivity and viscosity, which show the effects of temperature and nanoparticle diameter. The results for Nusselt number and heat transfer enhancement are prese...
Solidification and crystallization behaviour of bulk glass forming alloys
Aybar, Sultan; Akdeniz, Mahmut Vedat; Department of Metallurgical and Materials Engineering (2007)
The aim of the study was to investigate the crystallization kinetics and solidification behaviour of Fe60Co8Mo5Zr10W2B15 bulk glass forming alloy. The solidification behaviour in near-equilibrium and non-equilibrium cooling conditions was studied. The eutectic and peritectic reactions were found to exist in the solidification sequence of the alloy. The bulk metallic glass formation was achieved by using two methods: quenching from the liquid state and quenching from the semi-state. Scanning electron microsc...
Modelling of dropwise condensation on a cylindrical surface including the sweeping effect
Özler, Talip Emrah; Yamalı, Cemil; Department of Mechanical Engineering (2007)
The purpose of this study was to analyze the dropwise condensation on a cylindrical surface including the sweeping effect theoretically. For this purpose, first the problem of the equilibrium shape and departure size of drops on the outer surface of a cylinder was formulated. The equations of the surface of the drop were obtained by minimizing (for a given volume) the total energy of the drop which consists of surface and gravitational energy by using the techniques of variational calculus. The departure si...
Numerical investigation of coupled heat and mass transfer inside the adsorbent bed of an adsorption cooling unit
Solmus, Ismail; Rees, D. Andrew S.; Yamali, Cemil; Baker, Derek Keıth; KAFTANOĞLU, BİLGİN (2012-05-01)
In this study, the influence of several design parameters on the transient distributions of temperature, pressure and amount adsorbed in the radial direction of a cylindrical adsorbent bed of an adsorption cooling unit using silica gel/water have been investigated numerically. For this purpose, a transient one-dimensional local thermal non-equilibrium model that accounts for both internal and external mass transfer resistances has been developed using the local volume averaging method. For the conditions in...
Numerical analysis of transient laminar forced convection of nanofluids in circular ducts
Sert, Ismail Ozan; Sezer Uzol, Nilay; Kakaç, Sadik (2013-10-01)
In this study, forced convection heat transfer characteristics of nanofluids are investigated by numerical analysis of incompressible transient laminar flow in a circular duct under step change in wall temperature and wall heat flux. The thermal responses of the system are obtained by solving energy equation under both transient and steady-state conditions for hydro-dynamically fully-developed flow. In the analyses, temperature dependent thermo-physical properties are also considered. In the numerical analy...
Citation Formats
F. İnanır, B. Bak, Ş. Yıldız, and O. Keysan, “Numerical analysis of temperature distribution of superconducting coil stack,” presented at the ISMSIT 2017 1 st International Symposium on Multidisciplinary Studies and Innovative Technologies (November 2-4, 2017), Tokat, Turkey, 2017, Accessed: 00, 2021. [Online]. Available: