Design simulation and fabrication of low cost inkjet antennas

Can, Onol
Tolga, Cıftcı
Kucuk, Semıh
Karaosmanoglu, Barıscan
Ergül, Özgür Salih


Design optimization of rocket nozzles in chemically reacting flows
Yumusak, M.; Eyi, Sinan (2012-07-30)
The objective of this study is to develop a reliable and efficient design tool that can be used in chemically reacting flows. The flow analysis is based on the axisymmetric Euler and the finite rate chemical reaction equations. The finite rate chemistry model includes eight species and eleven reaction equations. These coupled equations are solved by using Newton's method. Both the numerical and the analytical methods are used to calculate the Jacobian matrices. Sensitivities are evaluated by using the adjoi...
Design optimization of a laser path length controller through numerical analysis and experimental validation
Fenercioglu, Tevfik Ozan; Yalçınkaya, Tuncay (IOS Press, 2019-01-01)
As an integral part of Strapdown Inertial Navigation Systems, ring laser gyroscopes (RLG) are exposed to joint loading conditions where thermal, static and dynamic loads occur simultaneously. The effects of different loading conditions on overall RLG performance should be addressed in parallel for an optimum design. A crucial aspect in this process is the development of the path length controller (PLC), consisting of a mirror, a composite piezo electric bending actuator and other motion transfer elements. T...
Design implementation of an electrophysiological data acquisition and analysis system
Sezen, Kumsal Deniz; İder, Y.Ziya; Department of Electrical and Electronics Engineering (1991)
Design and performance evaluation of block coded modulation systems
Sayraç, Berna; Yücel, Melek; Department of Electrical and Electronics Engineering (1992)
Design improvements on mixed flow pumps by means of computational fluid dynamics
Özgen, Onur; Albayrak, Kahraman; Department of Mechanical Engineering (2006)
The demand on high efficiency pumps leads the manufacturers to develop new design and manufacturing techniques for rotodynamic pumps. Computational Fluid Dynamics (CFD) software are started to be used during the design periods for this reason in order to validate the designs before the pumps are produced. However the integration process of CFD software into the design procedure should be made carefully in order to improve the designs. In this thesis, the CFD software is aimed to be integrated into the pump ...
Citation Formats
O. Can, C. Tolga, S. Kucuk, B. Karaosmanoglu, and Ö. S. Ergül, “Design simulation and fabrication of low cost inkjet antennas,” 2015, Accessed: 00, 2021. [Online]. Available: