Microstructure, phase relationships and microhardness of Fe60Al40-nHfn alloys (n=1, 3, and 5 at.%)

Date

2021-04-01

Author

Yildirim, Mehmet
Cetinbakis, Nese
Culu, Ayse
Akdeniz, Mahmut Vedat
Mehrabov, Amdulla

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

236
views

0
downloads

The microstructural evolution, solidification behavior, phase relationships, microhardness and room temperature magnetic properties of the hypoeutectic Fe60Al40-nHfn (n = 1, 3, and 5 at.%) compositions are investigated in detail. The microstructure of the studied alloys is composed of Fe-Al based dendrites and eutectic mixture. The components of the eutectic are B2 Fe-Al based and HfFe6Al6 tau(1) phases. With increasing Hf fraction, the amounts of eutectic and tau(1) phases increase continuously which results in significant strengthening. Based on the differential scanning calorimetry results, the eutectic reaction temperature is measured as 1251 degrees C. Fe60Al40-nHfn alloys show weak room temperature ferromagnetism and their magnetization values also increase with increasing Hf content.

Subject Keywords

Iron aluminides, Microstructure, Eutectic alloy, Microhardness

URI

https://hdl.handle.net/11511/90714

Journal

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH

DOI

https://doi.org/10.1515/ijmr-2020-7975

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Microstructural evolution and room-temperature mechanical properties of as-cast and heat-treated Fe50Al50-nNbn alloys (n=1, 3, 5, 7, and 9 at%) Yıldırım, Mehmet; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (2016-05-10) The microstructural evolution and room-temperature mechanical properties of Fe50Al50-nNbn alloys (n=1, 3, 5, 7, and 9 at%) were investigated after solidification and subsequent heat treatment. For all the compositions, the (Fe, Al)(2)Nb Laves phase formed because of the incomplete solid solubility of Nb in the Fe-Al-based phases and tended to develop an eutectic mixture with the Fe-Al-based phase. According to the results of EDS analysis and microstructural investigations, the Nb concentration of the eutect...
Design and development of high temperature nickel-based superalloys Eriş, Rasim; Akdeniz, Mahmut Vedat; Mekhrabov, Amdulla O.; Department of Metallurgical and Materials Engineering (2017) Remarkable high temperature mechanical properties of nickel-based superalloys are related with the arrangement of ternary alloying elements in L12-type ordered γ'-Ni3Al intermetallics. Therefore, in this thesis, high temperature site occupancy preference and energetic-structural characteristics of atomic short range ordering of ternary alloying X elements (X = Co, Cr, Hf, Mo, Nb, Pt, Re, Ru, Ta and W, respectively) in Ni75Al21.875X3.125 alloy systems have been studied by combining the statistico-thermodynam...
Effect of Mo addition on microstructure, ordering, and room-temperature mechanical properties of Fe-50Al Yildirim, Mehmet; Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (2018-10-01) The effects of Mo addition on microstructures, phase relationships, order-disorder phase-transition temperatures and room-temperature mechanical properties of Fe50Al50-nMon alloys (n=1, 3, 5, 7, and 9, mole fraction, %) were investigated after solidification and heat treatment. Structural characterization of the samples was performed via X-ray diffraction (XRD), scanning electron microscopy (SEM) and differential scanning calorimetry. Room-temperature mechanical properties were investigated by conducting co...
Spectroelectrochemical investigation of pentacarbonyl(pyrazine)metal(0) (metal = Cr, Mo, W) complexes of group 6 elements Yaman, SO; Nalbant Esentürk, Emren; Kayran, C; Önal, Ahmet Muhtar (2002-01-01) The electrochemical behaviour of pentacarbony l(pyrazine) metal (0) complexes of the group 6 elements was studied by cyclic voltammetry in dichloromethane-(n-Bu)(4)NBF4 solvent-electrolyte couple at -20 degreesC vs. Ag/Ag+ or SCE reference electrode. Constant potential electrolyses of the complexes were carried out at their first oxidation peak potentials and monitored in situ by UV-Vis spectrometry. Electrolysis of W(CO)(5)pz produces [W(CO)(5)pz](+) and a similar electrochemical mechanism is expected both...
Microstructure characterization of heat-treated ferromagnetic steels by magnetic barkhausen noise method Gür, Cemil Hakan (2019-01-01) This paper presents non-destructive evaluation of microstructures of heat treated steels by the Magnetic Barkhausen Noise (MBN) method. Various steel specimens having different microstructures were produced by appropriate heat treatments. All specimens were characterized by metallographic examinations, hardness and MBN measurements. The results showed that MBN parameters are highly sensitive to the variations in the microstructure, and this method is a promising candidate for practical non-destructive chara...

Citation Formats

M. Yildirim, N. Cetinbakis, A. Culu, M. V. Akdeniz, and A. Mehrabov, “Microstructure, phase relationships and microhardness of Fe60Al40-nHfn alloys (n=1, 3, and 5 at.%),” INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, pp. 280–287, 2021, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/90714.