Effects of aluminum content and aging on the selectivity and reactivity of metal-oxide-supported Pd and Cu catalysts

Date

2014-01-01

Author

Goulas, Konstantinos
Dietrich, Paul
Grippo, Adam
Günbaş, Emrullah Görkem
Kulzick, Matthew
Tosté, Dean

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

18
views

0
downloads

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84954240232&origin=inward
https://hdl.handle.net/11511/92500

Conference Name

Catalysis and Reaction Engineering Division 2014 - Core Programming Area at the 2014 AIChE Annual Meeting

Collections

Department of Chemistry, Conference / Seminar

Suggestions

OpenMETU
Core

EFFECTS OF THERMAL AGING ON THE PROPERTIES AND LIFETIME PREDICTION OF HYDROXYL-TERMINATED POLYBUTADIENE AKBAS, A; AKSOY, S (Elsevier BV, 1994-01-01) Thermal ageing of hydroxyl-terminated polybutadiene propellant binders was carried out at various temperatures between 50 and 100-degrees-C. The changes caused by this treatment in properties such as melt viscosity, functional end-groups, molecular weight, tensile strength, elastic modulus and ultimate elongation were examined. The viscosity and average molecular weight increased with the ageing temperature and ageing period. A decrease in ultimate elongation and an increase in elastic modulus were observed...
Effects of pH and cobalt concentration on the properties of nickel cobalt alloy plating Başkan, Mertcan; Erdoğan, Metehan; Karakaya, İshak (null; 2016-11-01) Nickel-Cobalt alloys are among the most prominent materials due to their magnetic properties, wear resistance, thermal conductivity and electrocatalytic activities. Although nickel and/or nickel-cobalt alloys have been plated from Watts solution for a long time, today, especially for the engineering applications, nickel sulfamate based solutions are commonly preferred due to the advantages of low internal stress and high deposition rate. The properties of nickelcobalt alloy platings are directly related to ...
Effects of Temperature and Storage Conditions on the Total Phenolic Content and Antioxidant Activity of Microcapsules including Strawberry Phenolics Şümnü, Servet Gülüm; Öztop, Halil Mecit (null; 2018-04-13)
Effects of polymers and CMC concentration on rheological and fluid loss parameters of water-based drilling fluids Iscan, A. G.; Kök, Mustafa Verşan (2007-01-01) Fluid loss during drilling operations has a very significant effect on both reservoir formation damage and monetary terms. There are many additives to control this unwanted phenomenon. Nevertheless, most of these substances are artificial chemicals. Thus, they are not only expensive, but also hazardous to the environment. In this article, a more natural method was applied to overcome the higher filtration problems by employing carboxyl methyl cellulose (CMC) and polymers (XT), DSHV, and MAC PR. Drilling flu...
Effects of micro-nano titania contents and maleic anhydride compatibilization on the mechanical performance of polylactide CAN, ULAŞ; Kaynak, Cevdet (Wiley, 2020-02-01) The first aim of this study was to compare influences of various contents of the micro- (200 nm) and nano (50 nm)-sized titania (TiO2) particles especially on the mechanical performance of the polylactide (PLA) biopolymer. Micro- and nano-composites were prepared by twin-screw extruder melt mixing, while the specimens were shaped by compression molding. Scanning electron microscope analyses and mechanical tests revealed that due to the most efficient uniform distribution in the matrix, the best improvements...

Citation Formats

K. Goulas, P. Dietrich, A. Grippo, E. G. Günbaş, M. Kulzick, and D. Tosté, “Effects of aluminum content and aging on the selectivity and reactivity of metal-oxide-supported Pd and Cu catalysts,” Georgia, Amerika Birleşik Devletleri, 2014, vol. 2, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84954240232&origin=inward.