"Dynamic testing of BFRP and CFRP composite materials".

1983
Metin, Seyfi Erol

Suggestions

"short time restoration of signals degrated by signal dependent noise".
Doğanata, Zinnur; Department of Electrical Engineering (1984)
"ROTATION OF MATERIAL AXES EFFECTS ON FREE BENDING VIBRATIONS RESPONSE OF COMPOSITE MINDLIN BASE PLATES OR PANELS STIFFENED BY THREE BONDED PLATE STRIPS"
Yuceoglu, U.; Javanshir, J.; Farsadi, T.; Guvendik, O. (2011-11-17)
In the present study, the rotation of material axes on the free bending vibrations response of a certain type of composite "Bonded and Stiffened System" is theoretically analyzed and numerically solved with some numerical results. The composite "Bonded and Stiffened System" is composed of a "Mindlin Base Plate or Panel" reinforced by three "Bonded Stiffening Plate Strips". In the analysis, the 90 rotation effects of the material axes on the natural frequencies and the mode shapes of the entire "System" are ...
"A drill-hole database management system for coal beds".
Doğru, Neslihan; Department of Mining Engineering (1987)
"High precision CNC motion control"
Ay, Gökçe Mehmet; Dölen, Melik; Department of Mechanical Engineering (2004)
This thesis focuses on the design of an electrical drive system for the purpose of high precision motion control. A modern electrical drive is usually equipped with a current regulated voltage source along with powerful motion controller system utilizing one or more micro-controllers and/or digital signal processors (DSPs). That is, the motor drive control is mostly performed by a dedicated digital-motion controller system. Such a motor drive mostly interfaces with its host processor via various serial comm...
"Design and construction of a constant-bending-moment room-temperature rotary fatigue-testing-machine and an investigation of the effect of sensivity to intercrystal-line disintegration upon the mechanical properties of 18-8 chromium-nickel austinitic steel".
Güney, Erdoğan; Department of Mechanical Engineering (1965)
Citation Formats
S. E. Metin, ““Dynamic testing of BFRP and CFRP composite materials”.,” Middle East Technical University, 1983.