A Comparison of Optimal Force-Based and Performance-Based Designs for a Planar Ordinary Moment-Resisting Steel Frame

Date

2021-06-15

Author

Eser, Hasan
Hasançebi, Oğuzhan

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

236
views

0
downloads

URI

https://hdl.handle.net/11511/93772

Conference Name

AI and Big Data in Engineering Applications

Collections

Department of Civil Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

A COMPARISON OF THE THERMAL PERFORMANCE OF A CONVENTIONAL FIN BLOCK AND PARTIALLY COPPER AND ALUMINUM FOAM EMBEDDED HEAT SINKS Ataer, S. Kaancan; Yamali, Cemil; Albayrak, Kahraman (2020-01-01) In this research, the metal foams with 4,8,16 pores/cm, an aluminium foam which has 0.93 porosity and a copper foam which has 0.90 porosity that are integrated into a heat sink with a special geometry were designed and tested. During the process of the experiments, the thermal resistances and the pressure losses of the metal foam integrated heat sinks were tested by applying different heat fluxes (10.67, 15.75, 21.33 and 31.50 kW/m(2)) and two distinct frontal air velocities (4 and 6 m/s) to the specimens. ...
A comparison of leakage rate and leachate removal rate for the design of lined containment systems Akgün, Haluk (1996-11-20) The design of lining systems for the containment of liquids, for example to contain the leachate generated within a landfill, has become rather sophisticated, employing state-of-the-art technologies from such disparate disciplines such as geotechnical engineering and polymer science. The objective, and to a confident degree, the achievement, has been the prevention of contamination of groundwater and in particular surface waters that support humans and animals alike. The technology involving the design of t...
A comparison of grindability methods for cement clinker Hemmati, Nader; Hoşten, Çetin; Department of Mining Engineering (1995)
A Comparison of MWIR and LWIR Imaging Systems with regard to Range Performance Turgut, Berk Berkan; Artan, Goktug Gencehan; Bek, Alpan (2018-04-18) Range performance of an imaging system is a key factor for an infrared search and tracking system with a purpose of detection, recognition and identification. Therefore, the prediction of the expected range performance is of utmost importance. The range prediction includes many variables that affect the outcome. Wavelength is one of the most important parameters because it has an enormous effect on range, but detector technology directly related to range performance. In this study, MWIR and LWIR imaging sy...
A comparison of particle bed breakage and rod mill grinding with regard to mineral liberation and particle shape effects Hoşten, Çetin; Ozbay, C (1998-09-01) Samples of a chromite ore were ground by conventional rod mill and by piston-die press. Five size fractions of products from the two comminution devices having different modes of breakage were analyzed for the percent degree of chromite liberation and particle Shape by an image analysis software. Results confirmed enhanced liberation in particle bed breakage achieved in the piston-die press. Particles ground in the rod mill had no shape differences as a function of particle size. Particle bed breakage gener...

Citation Formats

H. Eser and O. Hasançebi, “A Comparison of Optimal Force-Based and Performance-Based Designs for a Planar Ordinary Moment-Resisting Steel Frame,” presented at the AI and Big Data in Engineering Applications, İstanbul, Türkiye, 2021, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/93772.