Role of Stabilizing Surfactants on Capacitance, Charge, and Ion Transport in Organic Nanoparticle-Based Electronic Devices

2019-03-01
Ameri, Mohsen
Al-Mudhaffer, Mohammed F.
Almyahi, Furcian
Fardell, Georgia C.
Marks, Melissa
Al-Ahmad, Alaa
Fahy, Adam
Andersen, Thomas
Elkington, Daniel C.
Feron, Krishna
Dickinson, Michael
Samavat, Feridoun
Dastoor, Paul C.
Griffith, Matthew J.
Deposition of functionalized nanoparticles onto solid surfaces has created a new revolution in electronic devices. Surface adsorbates such as ionic surfactants or additives are often used to stabilize such nanoparticle suspensions; however, little is presently known about the influence of such surfactants and additives on specific electronic and chemical functionality of nanoparticulate electronic devices. This work combines experimental measurements and theoretical models to probe the role of an ionic surfactant in the fundamental physical chemistry and electronic charge carrier behavior of photodiode devices prepared using multicomponent organic electronic nanoparticles. A large capacitance was detected, which could be subsequently manipulated using the external stimuli of light, temperature, and electric fields. It was demonstrated that analyzing this capacitance through the framework of classical semiconductor analysis produced substantially misleading information on the electronic trap density of the nanoparticles. Electrochemical impedance measurements demonstrated that it is actually the stabilizing surfactant that creates capacitance through two distinct mechanisms, each of which influenced charge carrier behavior differently. The first mechanism involved a dipole layer created at the contact interfaces by mobile ions, a mechanism that could be replicated by addition of ions to solution-cast devices and was shown to be the major origin of restricted electronic performance. The second mechanism consisted of immobile ionic shells around individual nanoparticles and was shown to have a minor impact on device performance as it could be removed upon addition of electronic charge in the photodiodes through either illumination or external bias. The results confirmed that the surfactant ions do not create a significantly increased level of charge carrier traps as has been previously suspected, but rather, preventing the diffusion of mobile ions through the nanoparticulate film and their accumulation at contacts is critical to optimize the performance.
ACS APPLIED MATERIALS & INTERFACES

Suggestions

Effect of CNTs dispersion on electrical, mechanical and strain sensing properties of CNT/epoxy nanocomposites
Tanabi, Hamed; Erdal Erdoğmuş, Merve (Elsevier BV, 2019-03-01)
The remarkable electrical and mechanical properties of carbon nanotubes (CNTs) render CNT-reinforced nanocomposites as potentially attractive materials for strain-sensing and monitoring purposes. The dispersion state of CNTs in polymeric matrix has a significant role on the physical and the mechanical properties of the resulting CNT reinforced nanocomposites. In this study, a series of experiments were designed to investigate the effect of dispersion process parameters and CNT concentration, as well as thei...
Effect of Laser Wavelength on AZO Surface Texturing by Direct Laser Processing / Patterning for Thin-Film Silicon Solar Cells Applications
Demircioğlu, Zeynep; Nasser, Hisham; Balog, Robert S.; Turan, Raşit (2018-01-01)
Surface texturing of transparent conductive oxides is crucial to improve the fraction of incident light trapped in the absorber layer of thin film silicon based solar cells to improve the device performance. In this work, we fabricate and compare periodic, overlapping, and random surface textures and patterns on aluminium doped zinc oxide (AZO) using direct laser processing. The effects of the used laser wavelength, laser operating frequency, and pulse periodicity on the structural, morphological, and optic...
Effect of chirality on the stability of carbon nanotubes : Molecular-dynamics simulations
Erkoc, S; Malcıoğlu, Osman Barış (2001-07-01)
The effect of chirality on the structural stability of single-wall carbon nanotubes have been investigated by performing molecular-dynamics computer simulations. Calculations have been realized by using an empirical many-body potential energy function for carbon. It has been found that carbon nanotube in chiral structure is more stable under heat treatment relative to zigzag and armchair models. The diameter of the tubes is slightly enlarged under heat treatment.
Effect of a carbon black surface treatment on the microwave properties of poly(ethylene terephthalate)/carbon black composites
Koysuren, Ozcan; Yesil, Sertan; Bayram, Göknur; Secmen, Mustafa; Aydın Çivi, Hatice Özlem (Wiley, 2008-07-05)
A surface treatment was applied to carbon black to improve the electrical and microwave properties of poly(ethylene terephthalate) (PET)-based composites. Three different formamide solutions with 1, 2, and 3 wt % concentrations were prepared to modify the surface chemistry of carbon black. Microwave properties such as the absorption loss, return loss, insertion loss, and dielectric constant were measured in the frequency range of 812 GHz (X-band range). Composites containing formamide-treated carbon black e...
Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites
Tulbez, Simge; ESEN, ZİYA; Dericioğlu, Arcan Fehmi (2020-06-01)
The present study investigates the effect of additional carbon source, in the form of carbon nanotubes (CNTs), on mechanical and thermal properties of carbon fiber reinforced silicon carbide (C/C-SiC) ceramic matrix composites (CMC) produced by liquid silicon infiltration (LSI) technique. The CNTs used in this study were impregnated into the C/C preforms before the liquid silicon infiltration stage. The results showed that the addition of excess carbon to the C/C preforms in the form of CNTs enhanced Si inf...
Citation Formats
M. Ameri et al., “Role of Stabilizing Surfactants on Capacitance, Charge, and Ion Transport in Organic Nanoparticle-Based Electronic Devices,” ACS APPLIED MATERIALS & INTERFACES, vol. 11, no. 10, pp. 10074–10088, 2019, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/94416.