Grid independence study for a thick airfoil: DU00-W-212 at high Reynolds numbers

2021-05-25

Suggestions

Grid Fin Aerodynamic Analysis and Parametric Design Study in Supersonic Flow Using Computational Fluid Dynamics
Dinçer, Erdem; Sezer Uzol, Nilay (2021-09-08)
Grid impedance estimation based adaptive controller design for back-to-back wind turbine power converters for stable operation in distorted and weak grid
Temiz, Hakan; Keysan, Ozan; Department of Electrical and Electronics Engineering (2019)
This thesis involves grid impedance estimation based adaptive controller design for back-to-back wind turbine power converters for stable operation in distorted and weak grid. The study focuses on the low frequency harmonic elimination of injected current to the grid under distorted grid conditions and maintaining system stability under wide range of grid impedance values for Voltage Source Inverters (VSIs) connected to the grid via LCL filter. To eliminate 5th and 7th harmonics of the injected current, a c...
Gridability of mixtures of pure minerals
Turgut, Cafer; Arol, Ali İhsan; Department of Mining Engineering (1996)
GRID RESILIENCY ISSUES WITH A HYBRID SOLAR-BATTERY SYSTEM
Zia, Moaz; Fahrioğlu, Murat; Electrical and Electronics Engineering (2021-8-20)
Harmonics are one of the main power quality issues which needs to be addressed while designing a microgrid. If harmonics are present in the system, they can cause the load to malfunction and damage. With increasing number of non-linear loads and integration of distributed generators (DG) into the power system, harmonic mitigation is of paramount importance. There is a lot of work available in literature which deduce the benefits of integrating battery into the microgrid to improve renewable energy source (R...
Grid And Polygon Representations In Computer-Aided Architectural Design
Özgüç, Bülent (Middle East Technical University, Faculty of Architecture, 1980)
Mimarlıkta genellikle yedi tür bilgisayar ile çİzge tekniği kullanılmaktadır. Üç boyutlu bilgisayar çizgesi ile uğraşan bilim adamları, bu teknikleri daha değişik biçimde, on başlık altında toplamaktadırlar. Bu yazıda, bunlardan iki tanesi, ızgara ve çokgen çizim tekniklerinin bilgisayar kullanarak mimarlıkta uygulamaları tartışılmaktadır. Izgara yaklaşımı, fazla duyarlık gerektiği zaman aşırı bilgisayar belleği gerektirmekte, ancak kullanılması kolay olup, mekansal özellikleri rahatlıkla tarif edebilmekted...
Citation Formats
E. Orbay Akcengiz and N. Sezer Uzol, “Grid independence study for a thick airfoil: DU00-W-212 at high Reynolds numbers,” presented at the Wind Energy Science Conference 2021, Hannover, Almanya, 2021, Accessed: 00, 2022. [Online]. Available: https://www.wesc2021.org/fileadmin/wesc2021/themes/2/BoA_-_Theme_02.pdf.