Shape optimum design of trusses under multiple loding conditions.

Download
023394.pdf
1992
Uz, Atilla
Show full item record
160
views
0
downloads
https://hdl.handle.net/11511/9534
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Shape optimal design of multi-purpose beam structures
Turan, Ahmet Metin; Oral, Süha; Department of Mechanical Engineering (1999)
Formation preserving path finding in 3-D terrains
Bayrak, Ali Galip; Polat, Faruk (Springer Science and Business Media LLC, 2012-03-01)
Navigation of a group of autonomous agents that are required to maintain a formation is a challenging task which has not been studied much especially in 3-D terrains. This paper presents a novel approach to collision free path finding of multiple agents preserving a predefined formation in 3-D terrains. The proposed method could be used in many areas like navigation of semi-automated forces (SAF) at unit level in military simulations and non-player characters (NPC) in computer games. The proposed path findi...
Creep deformation in reinforced concrete beams.
Atımtay, Ergin; Department of Civil Engineering (1967)
Pseudo-Dynamic Testing, Performance Assessment, and Modeling of Deficient Reinforced Concrete Frames
Sucuoğlu, Haluk; Binici, Barış (2014-09-01)
A pair of half-scale, three-story, three-bay concrete bare frames were tested by the pseudo-dynamic (PsD) testing procedure. Both frames represent common deficiencies. of non-seismic construction. Continuous column reinforcement in one specimen and insufficient lap splices at the bottom ends of columns in the other specimen were the only significant differences. Measured seismic performances of both frames were assessed by using the rotation and strain-based acceptance criteria of two different seismic code...
Corrosion Resistance and Cytocompatibility of Magnesium-Calcium Alloys Modified with Zinc- or Gallium-Doped Calcium Phosphate Coatings
TAMAY, DİLARA GÖKSU; Gokyer, Seyda; Schmidt, Jurgen; Vladescu, Alina; HURİ, PINAR; Hasırcı, Vasıf Nejat; Hasırcı, Nesrin (2022-01-12)
In orthopedic surgery, metals are preferred to support or treat damaged bones due to their high mechanical strength. However, the necessity for a second surgery for implant removal after healing creates problems. Therefore, biodegradable metals, especially magnesium (Mg), gained importance, although their extreme susceptibility to galvanic corrosion limits their applications. The focus of this study was to control the corrosion of Mg and enhance its biocompatibility. For this purpose, surfaces of magnesium-...
Citation Formats
A. Uz, “Shape optimum design of trusses under multiple loding conditions.,” Middle East Technical University, 1992.
METU IIS - Integrated Information Service open@metu.edu.tr