Dynamic analysis of piping systmes using transfer matrix method.

Download
1992
Akdoğan, İsmail Gürkan

Suggestions

Dynamic analysis of harmonically excited non-linear structures by using iterative model method
Kuran, Bayındır; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1992)
Makina Mühendisliği Ana Bilim Dalı Tez Yöneticisi : Prof. Dr. H. Nevzat ÖZGÜVEN Ağustos 1992, 177 Sayfa Çok serbestlik dereceli doğrusal olmayan sistemlerin dinamik tepkeleri genellikle hareket denklemlerinin sayısal integrasyonu ile bulunmaktadır. Bu, sürekli rejim tepki analizi için çok pahalı olmaktadır. Bu çalışmada, doğrusal olmayan yapıların harmonik ve periyodik tepki analizi için etkili ve ekonomik bir yöntem geliştirildi. Bu yöntemde, hareket denklemleri ilk önce doğrusal olmayan cebirsel denklem s...
Dynamic analysis of a three-phase induction motor employing cycle-selection method of control.
Ermiş, Muammer; Department of Electrical Engineering (1976)
Dynamic analysis of framed off-shore structures.
Asik, Mehmet Sulfi; Department of Civil Engineering (1985)
Dynamic analysis of fluid-pier interaction.
Demirci, Yusuf; Department of Civil Engineering (1985)
Dynamic characterization of bolted joints using FRF decoupling and optimization
Tol, Serife; Özgüven, Hasan Nevzat (2015-03-01)
Mechanical connections play a significant role in predicting dynamic characteristics of assembled structures. Therefore, equivalent dynamic models for joints are needed. Due to the complexity of joints, it is difficult to describe joint dynamics with analytical models. Reliable models are generally obtained using experimental measurements. In this paper an experimental identification method based on FRF decoupling and optimization algorithm is proposed for modeling joints. In the method the FRFs of two subs...
Citation Formats
İ. G. Akdoğan, “Dynamic analysis of piping systmes using transfer matrix method.,” Middle East Technical University, 1992.