Homojen ortamlarda yıldız şeklinde çatlaklar ve homojen olmayan ortamlarda gelişigüzel radyal ve griffith çatlak grupları

Date

1977-07-15

Author

Aksoğan, O.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

148
views

0
downloads

URI

https://hdl.handle.net/11511/95560

Collections

Department of Civil Engineering, Project and Design

Suggestions

OpenMETU
Core

Generalized finite differences for the solution of one dimensional elastic plastic problems of nonhomogeneous materials Uygur, Pelin; Tokdemir, Turgut; Department of Engineering Sciences (2007) In this thesis, the Generalized Finite Difference (GFD) method is applied to analyze the elastoplastic deformation behavior of a long functionally graded (FGM) tube subjected to internal pressure. First, the method is explained in detail by considering the elastic response of a rotating FGM tube. Then, the pressurized tube problem is treated. A long FGM tube with fixed ends (axially constrained ends) is taken into consideration. The two cases in which the modulus of elasticity only and both the modulus of e...
Radiative heat transfer modeling of cavities with inhomogeneous participating media using Monte Carlo ray tracing method Dincer, Selim; Tarı, İlker; Department of Mechanical Engineering (2022-1-31) A Monte Carlo ray-tracing method is developed to solve radiative heat transfer in inhomogeneous participating media with three-dimensional complex enclosures. The study covers the application of the Monte Carlo method to view factor calculations, surface-to-surface heat exchange problems, and gray and non-gray participating media analysis. Firstly, the present method is validated against the analytical solutions to calculate the view factor of a simple cylindrical e...
RF coil system design for MRI applications inhomogeneous main magnetic field Yılmaz, Ayhan Ozan; Aşkar, Murat; Department of Electrical and Electronics Engineering (2007) In this study, RF coil geometries are designed for MRI applications using inhomogeneous main magnetic fields. The current density distributions that can produce the desired RF magnetic field characteristics are obtained on predefined cubic, cylindrical and planar surfaces and Tikhonov, CGLS, TSVD and Rutisbauer regularization methods are applied to match the desired and generated magnetic fields. The conductor paths, which can produce the current density distribution calculated for each surface selection an...
Analysis of magnetic resonance imaging in inhomogenous main magnetic field Arpınar, Volkan Emre; Eyüboğlu, Behçet Murat; Department of Electrical and Electronics Engineering (2009) In this study, analysis of Magnetic Resonance Imaging (MRI) in inhomogeneous main magnetic field is conducted. A numerical model based on Bloch equation is implemented for MRI, to understand effect of inhomogeneous magnetic field to Magnetic Resonance (MR) signal. Using the model, relations between inhomogeneity levels in main magnetic field with energy, decay time, bandwidth of the FID signal is investigated. Also relation between the magnetic field inhomogeneity and field of view is determined. To simulat...
Homojen Bir İHA Filosunun Ayrık Dikdörtgen Sahaları Gözetlemek İçin Planlanması Tarakçı, Koray; Karasakal, Esra; Karasakal, Orhan (2021-07-05)

Citation Formats

O. Aksoğan, “Homojen ortamlarda yıldız şeklinde çatlaklar ve homojen olmayan ortamlarda gelişigüzel radyal ve griffith çatlak grupları,” 1977. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95560.