ORTA (MESO) ÖLÇEKLİ BİR HAVA TAHMİNİ YAZILIMIYLA AKUPLE EDİLMİŞ MİKRO ÖLÇEKLİ ATMOSFERİK AKIŞIN MODELLENMESİ

2018-10-15
Tuncer, İsmail Hakkı
Ahmet, Gökhan
Bu projede açık kaynaklı, Navier-Stokes akış çözücüsü OpenFOAM ile orta ölçekli (meso scale) hava tahminlerinde kullanılan WRF yazılımı akuple edilerek yüksek çözünürlüklü, mikro ölçekli (micro scale) atmosferik akış çözüm yöntemi geliştirilmiş ve doğrulama çalışmaları yapılmıştır. WRF global hava tahminlerinde kullanılan, gözlem verileriyle sürekli bir şekilde güncellenen düşük çözünürlüklü, bir atmosferik akış çözücüsüdür. OpenFOAM ise yapılı ve yapısız çözün ağlarında sonlu hacimler yöntemine dayalı, 3 boyutlu bir Navier-Stokes akış çözücüsüdür. Bu projenin amacı düşük çözünürlüklü WRF akış çözümleri ile yeryüzü topoğrafyasının istenilen çözünürlükte modellendiği küçük ölçekli alanlardaki Navier-Stokes çözümlerini sınır koşulları ile akuple etmektir. Bu projede geliştirilecek olan akuple çözüm yöntemleri mikro ölçekli rüzgar enerji potansiyelinin belirlenmesinde, rüzgar türbinleri için yer seçiminde (micro-siting) ve rüzgar türbinlerinin ileriye dönük, kısa süreli (günlük/haftalık) enerji üretim tahminlerinin elde edilebilmesinde kullanılabilecektir.

Suggestions

Unsteady atmospheric flow solutions with openfoam coupled with the numerical weather prediction software, WRF
Leblebici, Engin; Tuncer, İsmail Hakkı; Department of Aerospace Engineering (2018)
Ways to predict wind energy potential and energy generation accurately are sought in many applications such as the wind turbine siting and the short term wind power production estimation. Current wind energy prediction models are based on the statistical analysis of long term observation data and the reconstruction of average wind fields by means of numerical tools. Even if computational fluid dynamics tools based on Navier-Stokes solutions are employed for sectoral wind fields, the reconstruction of wind f...
Synthesis and characterization of novel perylene-3,4,9,10-tetracarboxylic acid derivatives
Mohiuddin, Obaidullah; Özser, Mustafa Erkut; Sustainable Environment and Energy Systems (2017-5)
Increasing demand and high consumption of energy lead the researchers to think about the alternative renewable and sustainable source that could fulfil the energy requirement. For this purpose smooth transition to renewable technologies are necessary. There are several alternative technologies available, among them Dye Sensitized Solar Cell (DSSC) can be the promising one. DSSC has achieved around 12% power conversion efficiency, hence improvement is possible if new materials are synthesized. Our study aims...
Determination of wind power potential and optimal wind power plant locations in Turkey
Çetinay, Hale; Güven, Ali Nezih; Tör, Osman Bülent; Department of Electrical and Electronics Engineering (2014)
Due to increased environmental concerns, utilization of the renewable energy, especially the wind power, gains importance. Like developed countries which have set their renewable energy targets for the long term integration, Turkish government has also set the goal as 20 GW of total wind power installed capacity in 2023. In this thesis, the wind power potential in Turkey is analyzed and different cases are studied to determine optimal locations for wind power plant establishment. In order to determine the w...
Numerical simulations of wind turbine wake interactions using actuator line and les models
Önel, Hüseyin Can; Tuncer, İsmail Hakkı; Department of Aerospace Engineering (2019)
Wind is one of the most promising renewable energy resources of the future. After years of optimization studies, Horizontal Axis Wind Turbines shine out as the most efficient type and have been the only model used in large scale commercial wind farms. Layout planning plays an important role in getting the most power out of a wind farm as much as turbine blade design. Most important parameter in this planning phase is the inevitable wake generated by rotors and its impact on other wind turbines which results...
Development of a high-order navier-stokes solver for aeroacoustic predictions of wind turbine blade sections
Yalçın, Özgür; Özyörük, Yusuf; Department of Aerospace Engineering (2015)
Increased interest in renewable energy in the world has lead to research on wind turbines at a great pace. However, these turbines have come with a noise problem. The noise source of wind turbines is primarily aerodynamic noise highly related to complex, three dimensional, unsteady flow fields around them. Therefore, determination of these sources requires successful, accurate, turbulent flow solutions. In addition, because acoustic waves are non-dispersive and non-dissipative, such solutions must be carrie...
Citation Formats
İ. H. Tuncer and G. Ahmet, “ORTA (MESO) ÖLÇEKLİ BİR HAVA TAHMİNİ YAZILIMIYLA AKUPLE EDİLMİŞ MİKRO ÖLÇEKLİ ATMOSFERİK AKIŞIN MODELLENMESİ,” 2018. Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/95877.