Single channel digital controller design for a high spinning rate rolling airframe missile

Date

2022-04-01

Author

Suicmez, E. C.
Kutay, Ali Türker

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

299
views

0
downloads

Spinning/Rolling Airframe Missiles (RAM) mostly use an analog (ON-OFF type) control approach that deflects control surfaces (fins) at minimum and maximum positions continuously, and control is achieved by applying phase shift between the minimum and maximum deflections during a complete roll cycle. Therefore, the control signal shape changes continuously during the roll cycle. In this study, a novel single channel digital controller is designed and tested for a high spinning rate (10-20 Hz) RAM. The digital controller adjusts the amplitude of fin deflections instead of applying a phase shift. In this way, control signal shapes are predetermined in design to completely decouple yaw and pitch dynamics. At the beginning of each roll cycle, the algorithm decides on the control signal shape and amplitude to apply throughout the cycle. Delays on the actuator system and sensor measurements which might lead to instability at high spinning rates are handled effectively thanks to the predetermined control signal shapes that are changing with 90-degree intervals. Detailed geometry of a surface-to-air spinning missile is used to obtain aerodynamic coefficients for the entire flight regime (i.e. from launch to terminal phase) via Missile DATCOM. The 6-DOF flight dynamics model and the controller algorithms are built in MATLAB/Simulink environment. The proposed digital controller is tested systematically for various scenarios and the performance is compared with the conventional analog control approach. The digital controller gives better performance compared to the analog approach under the influence of servo delays and sensor noise.

Subject Keywords

Spinning missile, Coning motion, Single-channel control, Digital control, Flight dynamics, Missile DATCOM, CONING MOTION, STABILITY

URI

https://hdl.handle.net/11511/96972

Journal

AERONAUTICAL JOURNAL

DOI

https://doi.org/10.1017/aer.2022.30

Collections

Department of Aerospace Engineering, Article

Suggestions

OpenMETU
Core

Control Allocation Strategies for a Hybrid Controlled Missile with NDI Autopilot Biyikli, Rabiya; Tekin, Raziye; Yavrucuk, İlkay (2022-01-01) This study presents roll angle, lateral, and longitudinal acceleration autopilots for a highly agile air defense missile with both aerodynamic tail control and thrust vector control (TVC) parts. Nonlinear Dynamic Inversion (NDI) is studied to handle bank-to-turn and agile maneuvers due to the cross-coupling effects. Output redefinition is implemented using the center of percussion idea for the nonminimum phase of the tail-controlled missiles. Another arduous feature of the system is that the dual control of...
Design of a grid fin aerodynamic control device for transonic flight regime Dikbaş, Erdem; Sert, Cüneyt; Baran, Özgür Uğraş; Department of Mechanical Engineering (2015) Grid fins is unconventional control devices and they are used for aerodynamic control of various types of missiles. Low hinge moment requirement and superior packaging possibilities make grid fins attractive when compared to conventional planar fins. However, design of grid fins is more involved when transonic flight regime is considered. The reason for this is high drag force encountered by the grid fin. The purpose of the thesis is to overcome this drawback and to define a proper design methodology for tr...
Three dimensional aerodynamic analysis of missiles by a panel method Başoğlu, Osman; Özyörük, Yusuf; Department of Aeronautical Engineering (2002) Panel methods are extensively used in aerodynamic analysis of missiles in early stages of their development. An existing TUBİTAK-SAGE panel code is modified and improved for routine and more efficient calculation of the aerodynamic coefficients of various missile configurations at subsonic and supersonic flight conditions. Particularly, the poor convergence, user unfriendliness and poor output characters of this code have been improved by modifying and adding new routines to it. Now the code with an incorpo...
Missile guidance with impact angle constraint Çilek, Barkan; Kutay, Ali Türker; Department of Aerospace Engineering (2014) Missile flight control systems are the brains of missiles. One key element of a missile FCS is the guidance module. It basically generates the necessary command inputs to the autopilot.Guidance algorithm selection depends on the purpose of the corresponding missile type. In this thesis, missile guidance design problem with impact angle constraint is studied which is the main concern of anti-tank and anti-ship missiles. Different algorithms existing in the literature have been investigated using various anal...
Robust Model Following Control Design for Missile Roll Autopilot Gezer, R. Berk; Kutay, Ali Türker (2014-07-11) This paper presents a robust model following control method augmented with error integration and Luenberger observer for anti-air missile roll autopilot designed using optimal control laws. The design is shown to be robust to external disturbance, noisy measurements and sensor lags by frequency domain analysis. The regulation performance of the controller is presented by simulations.

Citation Formats

E. C. Suicmez and A. T. Kutay, “Single channel digital controller design for a high spinning rate rolling airframe missile,” AERONAUTICAL JOURNAL, pp. 0–0, 2022, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/96972.