Experimental investigation of spatially-periodic scalar patterns in an inline mixer

Date

2015-11-22

Author

Başkan Perçin, Özge
Speetjens, Michel
Clercx, Herman

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

59
views

0
downloads

URI

https://hdl.handle.net/11511/97471

Conference Name

68th Annual Meeting of the APS DFD Conference

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental investigation of spatially-periodic scalar patterns in an inline mixer. Başkan Perçin, Özge; Speetjens, Michel; Clercx, Herman (2014-11-23)
Experimental investigation of spatially-periodic scalar patterns in an inline mixer. Başkan Perçin, Özge; Speetjens, Michel; Clercx, Herman (2014-09-14)
Experimental investigation of scalar patterns in a spatially periodic flow field Rajaei, Hadi; Başkan Perçin, Özge; Speetjens, Michel; Clercx, Herman (2013-11-24)
EXPERIMENTAL STUDY ON ACTIVE VIBRATION CONTROL OF A PIEZO-BEAM STRUCTURE WITH FUZZY LOGIC CONTROLLER Şenöz, Erdem Rahmi; Şahin, Melin (null; 2017-09-23) In this study, it has been shown that active vibration control of the beam can be provided using the fuzzy logic controller. The test setup consists of a cantilever beam which illustrates a wing of airplane or a blade of helicopter, piezoelectric patches pasted on both sides near the fixed end in order to make the beam smart. This piezo-beam system is intended to be suppressed a disturbing signal at the first resonance frequency by the controller signal. As a controller, fuzzy logic controller is preferred ...
Experimental investigation of flow characteristics of flexible wings with different stiffener orientations in linear translating motion Karakaş, Hasan Halil; Perçin, Mustafa; Department of Aerospace Engineering (2022-8-12) This study experimentally investigates the flow field around the wings, which first accelerate with constant acceleration from the rest and then perform a linear translating motion with constant velocity. Four wings, which are 3D-printed, with a bending stiffness in different directions are examined. The difference in bending stiffness values is achieved by placing stiffeners having different angles with the leading edge on the upper surface of the wing. The stiffeners are printed with wings to obtain well-...

Citation Formats

Ö. Başkan Perçin, M. Speetjens, and H. Clercx, “Experimental investigation of spatially-periodic scalar patterns in an inline mixer,” presented at the 68th Annual Meeting of the APS DFD Conference, Massachusetts, Amerika Birleşik Devletleri, 2015, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97471.