Experimental investigation of scalar patterns in a spatially periodic flow field

Date

2013-11-24

Author

Rajaei, Hadi
Başkan Perçin, Özge
Speetjens, Michel
Clercx, Herman

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

70
views

0
downloads

URI

https://hdl.handle.net/11511/97491

Conference Name

66th Annual Meeting of the APS DFD Conference

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Experimental investigation of spatially-periodic scalar patterns in an inline mixer Başkan Perçin, Özge; Speetjens, Michel; Clercx, Herman (2015-11-22)
Experimental study of wave characteristics on a thin layer of de/anti-icing fluid Özgen, Serkan; Sarma, GSR (2002-10-01) Several series of experiments were conducted in order to investigate wave formation and wave characteristics on a thin layer of de/anti-icing fluid using a nonintrusive technique. The configuration consists of a thin layer of de/anti-icing fluid deposited on the lower wall of the wind tunnel section, sheared by a turbulent airflow. Beyond a critical value of the wind speed, two-dimensional surface waves could be observed. The characteristics of these waves like the wavelength and the wave speed could be mea...
Experimental investigation of spatially-periodic scalar patterns in an inline mixer. Başkan Perçin, Özge; Speetjens, Michel; Clercx, Herman (2014-09-14)
Experimental investigation of spatially-periodic scalar patterns in an inline mixer. Başkan Perçin, Özge; Speetjens, Michel; Clercx, Herman (2014-11-23)
Experimental investigation of effects of cutting parameters on surface roughness in the WEDM process Gökler, Mustafa İlhan (2000-10-01) The experimental study presented in this paper aims to select the most suitable cutting and offset parameter combination for the wire electrical discharge machining process in order to get the desired surface roughness value for the machined workpieces. A series of experiments have been performed on 1040 steel material of thicknesses 30, 60 and 80 mm, and on 2379 and 2738 steel materials of thicknesses 30 and 60 mm. The test specimens have been cut by using different cutting and offset parameter combination...

Citation Formats

H. Rajaei, Ö. Başkan Perçin, M. Speetjens, and H. Clercx, “Experimental investigation of scalar patterns in a spatially periodic flow field,” presented at the 66th Annual Meeting of the APS DFD Conference, Pennsylvania, Amerika Birleşik Devletleri, 2013, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97491.