Design and development of a complex shear modulus measurement setup for viscoelastic materials

Date

2006-01-01

Author

Özgen, Gökhan Osman

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

38
views

0
downloads

URI

https://www.jstor.org/stable/44725298
https://hdl.handle.net/11511/97669

Journal

SAE 2005 Transactions Journal of Passenger Cars - Mechanical Systems

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

Design and development of a complex shear modulus measurement setup for viscoelastic materials Özgen, Gökhan Osman (2005-01-01) Details of the design and development study of a complex shear modulus measurement setup for viscoelastic materials have been presented in this paper. The new setup is specifically designed for measuring the complex shear modulus of pressure sensitive adhesives. The setup consists of a rigid block that is connected to a rigid fixture through two identical shear specimens of the viscoelastic material to be tested. The rigid block and the shear specimens resemble a single degree of freedom system. Once the fr...
Design and development of a simple power quality monitor for low voltage distribution system Yazlık, Önder; Ermiş, Muammer; Salor Durna, Özgül; Department of Electrical and Electronics Engineering (2014) Power Quality (PQ) is an important issue in the operation of distribution systems. The power delivered to the consumers should be as clean as possible. Quality of power is deﬁned in various standards or regulations such as The Electrical Distribution System Supply Reliability and Quality of Electricity Regulation in Turkey. To comply with these regulations the quality of the electrical power should be monitored and controlled at the consumer side which is at the end of the distribution system. This is achie...
Design and Development of Novel Fe-Co-B-Si-Nb-Cu Bulk Amorphous/Nanocrystalline Soft Magnetic Materials Akdeniz, Mahmut Vedat; Mehrabov, Amdulla (2009-06-01)
Design and implementation of a medium voltage thyristor controlled reactor Utalay, M Volkan; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1996)
Design and implementation of an annular acoustic levitation system Kandemir, Mehmet Hakan; Çalışkan, Mehmet; Department of Mechanical Engineering (2014) In standing wave acoustic levitation technique, a standing wave is obtained between a source and a reflector. Particles can be attracted towards pressure nodes in standing waves owing to the spring action. Hence, particles can be suspended in air. This operation can be performed on continuous structures as well as in several numbers of axes. In this study an annular acoustic levitation set-up is designed and built. The set-up consists of two langevin type piezoelectric transducers, two waveguides, an annula...

Citation Formats

G. O. Özgen, “Design and development of a complex shear modulus measurement setup for viscoelastic materials,” SAE 2005 Transactions Journal of Passenger Cars - Mechanical Systems, vol. 114, no. 6, pp. 2638–2647, 2006, Accessed: 00, 2022. [Online]. Available: https://www.jstor.org/stable/44725298.