Electrochemical biosensor based on three components random conjugated polymer with fullerene (C60)

2022-10-01
KURBANOĞLU, SEVİNÇ
Cevher, Sevki Can
Toppare, Levent Kamil
Çırpan, Ali
Soylemez, Saniye
© 2022 Elsevier B.V.Herein, a conjugated polymer and fullerene bearing architecture-based electrochemical Tyrosinase (Tyr) enzyme inhibition biosensor for indomethacin (INDO) drug active compound has been developed. For this purpose, three moieties of benzoxadiazole, thienopyrroledione, and benzodithiophene containing conjugated polymer; poly[BDT-alt-(TP;BO)] was used as a transducer modifier together with fullerene for catechol detection. The specific combination of these materials is considered an effective way to fabricate highly sensitive and fast response catechol biosensors for the first time. Electrochemical and surface characteristics of the modified electrodes were obtained by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, and atomic force microscopy. The effect of the parameters during chronoamperometric measurements on the biosensor response was also studied. Using optimized conditions, biosensing of catechol was achieved between 0.5 and 62.5 µM with a limit of the detection 0.11 µM. Tyr inhibition was followed with INDO drug active compound and it was found that INDO has a mixed type characteristic of enzyme kinetics with an I50 value of 15.11 µM.
Bioelectrochemistry

Suggestions

Electrochemical synthesis of crowned conducting polymers : nature of radical cations in polymerization and mechanism of conductivity
Cihaner, Atilla; Önal, Ahmet Muhtar; Department of Chemistry (2004)
Poly(dibenzo-18-crown-6) (Poly(DB18C6)) was synthesized by electrochemical oxidation of dibenzo-18-crown-6 (DB18C6) using a mixture of acetonitrile and dichloromethane as solvent and tetrabutylammonium tetrafluoroborate (TBABF4) or tetrabutylammonium hexafluorophosphate (TBAPF6) as supporting electrolyte. The anodic polymerization of DB18C6 was investigated using in-situ ESR and in-situ UV-VIS spectroscopic techniques. Spectroelectrochemical (SPEL) properties and thermal analysis of the resulting polymers h...
ELECTROINITIATED POLYMERIZATION OF ACRYLAMIDE BY DIRECT ELECTRON-TRANSFER
HACIOGLU, B; Akbulut, Ural; Toppare, Levent Kamil (Wiley, 1989-10-01)
Electroinitiated polymerization of acrylamide was carried out in acetonitrile–tetrabutylammonium fluoroborate by electrolytic reduction of monomer. It was shown by cyclic voltammetry that direct electron transfer from the cathode to the monomer can be achieved in this solvent–electrolyte system. Reduction peak potentials measured by cyclic voltammetry indicated that sodium salts will interfere with such a mechanism. Since the reduction peak potential of sodium salt and dimethylformamide are found to be lowe...
Electrochromic and photovoltaic applications of conjugated polymers
Apaydın, Doğukan Hazar; Toppare, Levent Kamil; Department of Polymer Science and Technology (2012)
Three new azobenzene containing conjugated monomers were designed and synthesized. Resulting monomers were characterized by means of 1H NMR and 13C NMR techniques. Monomers (E)-1,2-bis(4-(thiophen-2-yl)phenyl)diazene (M1), (E)-1,2-bis(4-(4-hexylthiophen-2-yl) phenyl) diazene (M2) and (E)-1,2-bis(2-fluoro-4-(4-hexylthiophen-2-yl)phenyl) diazene (M3) were electrochemically polymerized using cyclic voltammetry to give polymers P1, P2 and P3. The polymers were subjected to spectroelectrochemical and kinetic stu...
Electrochemical polymerization and characterization of polyether-substituted aniline derivatives
Tirkeş, Süha; Oenal, Ahmet M. (Wiley, 2007-08-01)
New compounds consisting of aniline units linked by polyether bridges have been synthesized and their electrochemical polymerization was performed via constant potential electrolysis and cyclic voltammetry in an aqueous solution containing 3.0 moI L-1 H2SO4. Chemical polymerization was carried out using (NH4)(2)S2O8 as oxidizing agent. It was found that both methods gave the same polymer product without any cleavage of the polyether bridge between aniline rings. The polymers were characterized using the Fou...
Electrochemical copolymerization of 2-substituted thiophene derivative linked by polyether bridge with thiophene
Cihaner, A; Önal, Ahmet Muhtar (2005-09-01)
New conducting copolymers have been synthesized via electrochemical oxidation of thiophene (Th) in the presence of monomer bis(2-thienyl)ethyl (1). Cyclic voltammetry (CV) studies showed that the presence of monomer I in the electrolytic solution greatly changes the CV behaviour of the formation of the polythiophene films. It is found that the increasing ratio of I was found to decrease electroactivity of copoly(I-Th). Electrochemical synthesis of copolymer films was achieved via constant potential electrol...
Citation Formats
S. KURBANOĞLU, S. C. Cevher, L. K. Toppare, A. Çırpan, and S. Soylemez, “Electrochemical biosensor based on three components random conjugated polymer with fullerene (C60),” Bioelectrochemistry, vol. 147, pp. 0–0, 2022, Accessed: 00, 2022. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85135417136&origin=inward.