Finite element simulation of metal forming processes with automatic remeshing

Download

047373.pdf

Date

1995

Author

Kavaklı, Sebahattin

Metadata

Show full item record

Item Usage Stats

79
views

0
downloads

URI

https://hdl.handle.net/11511/10031

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Finite element modeling of plastic deformation in sheet metal forming Kırımlıoğlu, Sedat Savaş; Kaftanoğlu, Bilgin; Department of Mechanical Engineering (2002)
Finite element simulation of quench hardening Gür, Cemil Hakan (1996-07-01) In this study, an efficient finite element model for predicting the temperature field, volume fraction of phases and the evolution of internal stresses up to the residual stress states during quenching of axisymmetrical steel components is developed and implemented. The temperature distribution is determined by considering heat losses to the quenching medium as well as latent heat due to phase transformations. Phase transformations are modelled by discretizing the cooling cuves in a succession of isothermal...
Finite element modeling of capacitive micromachined ultrasonic transducers Yaralioglu, GG; Bayram, Barış; Nikoozadeh, A; Khuri-Yakub, BTP (2005-01-01) Transducers based on piezoelectric crystals dominate the biomedical ultrasonic imaging field. However, fabrication difficulties for piezoelectric transducers limit their usage for complex imaging modalities such as 2D imaging, high frequency imaging, and forward looking intravascular imaging. Capacitive micromachined ultrasonic transducers (CMUTs) have been proposed to overcome these limitations and they offer competitive advantages in terms of bandwidth and dynamic range. Further, the ease of fabrication e...
Finite element simulation of visco-plastic deformation on micro-computers Özkan, Cengiz Sinan; Tekkaya, Erman; Öztürk, Tayfur; Department of Metallurgical Engineering (1989)
Kalıntı Gerilmeler ve Şekil Bozulmasının Tahmini için Çeliklere Su Verme İşleminin Sonlu Eleman Yöntemi ile Simulasyonu Şimşir, Caner; Gür, Cemil Hakan (2005-10-02)

Citation Formats

S. Kavaklı, “Finite element simulation of metal forming processes with automatic remeshing,” Middle East Technical University, 1995.