Enhancing the Ductility of 3D-Printed Polylactic Acid

2021-06-10
Kaygusuz, Burçin
Özerinç, Sezer
20. Uluslararası Metalurji ve Malzeme Kongresi

Suggestions

Enhancing the CO2-philicity of Organic-Inorganic Hybrid Polyhedral Oligomeric Silsesquioxanes
Dumanlılar, Beril; Demirtaş, Cansu; Dilek Hacıhabiboğlu, Çerağ (null; 2019-04-08)
Enhancing the power conversion efficiency of polymer solar cells via selection of quinoxaline substituents
KARAGACTI, Ozge; CEVHER, ŞEVKİ CAN; HIZALAN, Gonul; HACIOGLU, Serife O.; Toppare, Levent Kamil; Çırpan, Ali (2017-12-07)
In this study, three random copolymers including quinoxaline derivatives with different substituent groups, 2,6-bis(trimethylstannyl)-4,8-bis(2-ethylhexyloxy) benzo[1,2-b: 4,5-b'] dithiophene and 4,7-dibromo2-(2-octyldodecyl)-2H-benzo[d][1,2,3] triazole, were designed and synthesized according to the donoracceptor (D-A) approach. H-1 NMR spectroscopy, UV-Vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography were utilized for the characterization of the polymers. Optical studies ...
Enhancing thermal conductivity of epoxy with a binary filler system of h-BN platelets and Al2O3 nanoparticles
Yetgin, Hasan; Veziroglu, Salih; Aktas, Oral Cenk; Yalçınkaya, Tuncay (Elsevier BV, 2020-04-01)
Epoxy resin is a common adhesive bonding material used to join dissimilar materials, especially in the electronics and aerospace industries. However, its low thermal conductivity and high coefficient of thermal expansion limit the direct use of epoxy in practical applications. In order to improve thermo-mechanical properties, we have prepared a series of epoxy composites using a binary system of hexagonal-boron nitride (h-BN) and aluminum oxide (Al2O3) fillers and analyzed the effect of the ratio of these f...
Improving the ductility of polylactic acid parts produced by fused deposition modeling through polyhydroxyalkanoate additions
Kaygusuz, Burçin; Özerinç, Sezer (2019-11-01)
Polylactic acid (PLA) is one of the most commonly used materials for fused deposition modeling (FDM) due to its low cost, biocompatibility, and desirable printing characteristics. However, its low ductility is a major disadvantage for engineering applications where high damage tolerance is needed. This study investigates the feasibility of polyhydroxyalkanoate (PHA) additions to PLA for improving the ductility of parts produced by FDM. Thermal and mechanical behavior of PLA/PHA specimens containing 12 wt % ...
Enhancing the Adhesion Strength of Nanotubular Oxide Layer onto the Ti6Al7Nb Substrate for Bone-Tissue Engineering Applications
İzmir, Merve; Ercan, Batur (null; 2017-12-31)
Citation Formats
B. Kaygusuz and S. Özerinç, “Enhancing the Ductility of 3D-Printed Polylactic Acid,” presented at the 20. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 2021, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/100755.