The Effect of Strain Rate and Temperature on Forming Limit Diagram for DKP-6112 and AZ31 Materials

Download

1-s2.0-S2351978920312579-main.pdf

Date

2020-01-01

Author

Goksen, Seckin
Darendeliler, Haluk

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

110
views

20
downloads

Subject Keywords

Forming Limit Diagram, Formability, Strain Rate, Temperature

URI

https://linkinghub.elsevier.com/retrieve/pii/S2351978920312579
https://hdl.handle.net/11511/102225

Journal

PROCEDIA MANUFACTURING

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

The effect of strain rate and temperature on forming limit diagram for DKP-6112 and AZ31 materials Goksen, Seckin; Darendeliler, Haluk (2020-01-01) Forming limit diagrams (FLDs) are used in sheet metal operations widely for predicting blank fracture and forming characteristics of materials. There are three approaches for building forming limit diagrams which are the experimental, theoretical and numerical methods. Experimental method, which includes Nakazima formability test, is generally preferred for determining forming limit diagrams, although it requires complex experimental setup and effort. This study, firstly, compares the experimentally determi...
The effect of strain rate and temperature on deep drawing for different constitutive relations Gökşen, Seçkin; Darendeliler, Haluk; Department of Mechanical Engineering (2019) In this study, the effects of strain rate and temperature on deep drawing process are investigated by considering different yield criteria and hardening models. For this purpose, various punch velocity and temperature values are considered using 1 mmthick DKP6112 and AZ31 sheet materials. The results are compared according to thickness strain distribution and punch force obtained by a commercial finite element software. To express constitutive relations of corresponding materials for different strain rate a...
The effect of copper on the microstructure and aging characteristics of an 0.8%C bainitic steel Yıldırım, Çağatay; Ögel, Bilgehan; Department of Metallurgical and Materials Engineering (2022-12-02) Copper causes hot shortness in steel. However, the 1:2 nickel-to-copper ratio avoids hot shortness phenomena. Also, it is known that an aging treatment applied to ferritic steels causes age hardening via the precipitation of Cu in the form of BCC copper-rich clusters. The latter phenomenon was studied extensively in low and medium-carbon steels. In this study, the copper precipitation in bainitic high-carbon steel and its effect on microstructure and properties are investigated. To achieve this, 0.8% C stee...
The influence of flow forming on the precipitation characteristics of Al2024 alloys Karakaş, Aptullah; Fenercioğlu, Tevfik Ozan; Yalçınkaya, Tuncay (2021-09-15) Aluminum alloys are heat treated for better specific strength. In certain cases, an intermediate cold work is applied between solution heat treatment and aging. In this study, a specific tube forming technique called flow forming is applied as the intermediate cold work to produce Al2024-T8 grade tubes, resulting in enhancement of mechanical properties. The correlation between the amount of cold work and final mechanical properties is studied through tensile tests, SEM and XRD. The study is concluded with a...
The role of synchronization of neural structures on neuron dynamics Nöral yapilarda senkronizasyonun hücre dinamikleri üzerine etkisi Karabacak, Ozkan; Elibol, Rahmi; Şengör, Neslihan Serap (2014-01-01) Due to the measurement techniques developed, it is now possible to observe signals at different levels in neural structures. These observations give rise to increasing works dealing with setting up the relation between such signals and cognitive processes, neurodegenerative diseases and neurobehavioral disorders. Computational neuroscience is becoming more influential in investigating the mechanisms underlining these signals. Especially oscillations in different neural structures and the role of these oscil...

Citation Formats

S. Goksen and H. Darendeliler, “The Effect of Strain Rate and Temperature on Forming Limit Diagram for DKP-6112 and AZ31 Materials,” PROCEDIA MANUFACTURING, vol. 47, pp. 1241–1244, 2020, Accessed: 00, 2023. [Online]. Available: https://linkinghub.elsevier.com/retrieve/pii/S2351978920312579.