A method for the preliminary design of flood detention basins with dual outlets

Download
038593.pdf
1995
Çiçek, Ogün Hakan
Show full item record
145
views
0
downloads
https://hdl.handle.net/11511/10279
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A Method for Optimum Layout Design of Concrete Gravity Dams
Yanmaz, Ali Melih; Özaydın, Vehbi (2001-10-01)
A Method for the Design of FRC Tunnel Linings Reinforced with GFRP Bars
Akyüz, Uğurhan; Erkus, Gokhan (2020-09-11)
New procedures for the design of precast segmental lining tunnels have been developed in recent years. The use of glass fiber reinforced polymer (GFRP) bars instead of conventional steel bars is increasing in precast segments. Besides, macro-synthetic fibers are also used as a replacement for traditional steel bars. It is possible to find design guidelines for the design of precast segments reinforced with GFRP or fiber reinforced concrete (FRC) precast segments with or without conventional reinforcement...
A Method for the design of FRC tunnel linings reinforced with FRP bars
Demir, Mutlu; Akyüz, Uğurhan; Department of Civil Engineering (2019)
There are some difficulties in the construction of precast conventional reinforced concrete tunnel segments. Due to corrosion problem of ordinary reinforcement, the task becomes more complicated. Moreover, the workmanship for the construction of segments is also very time consuming. There are some research for the design of tunnel segments with fiber reinforced polymer (FRP) bars. Besides, guidelines for the design of fiber reinforced concrete (FRC) tunnel linings are also available. This thesis provides a ...
A methodology for lining design of circular mine shafts in different rock masses
Öztürk, Hasan (2016-09-01)
In this study, the finite element numerical modelling of 2D shaft sections in a Hoek-Brown medium are carried out in a non-hydrostatic stress state in an attempt to predict pressures developing around mine shafts. An iterative process of applying support pressure until observing no failure zone around the shaft is used to simulate the required lining support pressure for different shaft models. Later, regression analysis is carried out to find a generic shaft pressure equation representing the rock mass and...
A methodology for the seismic damage assessment of low-rise reinforced concrete buildings
Nimako, Kwabena Omane; Sucuoğlu, Haluk; Department of Civil Engineering (1998)
Citation Formats
O. H. Çiçek, “A method for the preliminary design of flood detention basins with dual outlets,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr