Design and simulation of an adaptive MLSE receiver for GSM system

Download
1994
Canpolat, Bahadır

Suggestions

Design and simulation of an ABS for an integrated active safety system for road vehicles
Sahin, Murat; Ünlüsoy, Yavuz Samim (2010-01-01)
A design methodology for an anti-lock braking system (ABS) controller for four-wheeled road vehicles is presented. In the study, a flexible approach was adopted considering integration with an integrated active safety system control structure. In the hierarchical control strategy proposed for the ABS controller, a high-level controller, through vehicle longitudinal acceleration-based estimation, determines reference wheel slip values, and a low-level controller attempts to track these reference slip signals...
Design and simulation of an ABS for an integrated active safety system for road vehicles
Şahin, Murat; Ünlüsoy, Yavuz Samim; Department of Mechanical Engineering (2007)
Active safety systems for road vehicles have been improved considerably in recent years along with technological advances and the increasing demand for road safety. In the development route of active safety systems which started with introduction of digital controlled ABS in the late seventies, vehicle stability control systems have been developed which today, with an integration approach, incorporate ABS and other previously developed active safety technologies. ABS, as a main part of this new structure, s...
Design and simulation of a tranceiver architecture for VHF frequency hopping military radios
Dinçer, Oral; Tanık, Yalçın; Department of Electrical and Electronics Engineering (1996)
Design and simulation of a traction control system for an integrated active safety system for road vehicles
Oktay, Görkem; Ünlüsoy, Yavuz Samim; Department of Mechanical Engineering (2008)
Active safety systems for road vehicles make a crucial preventive contribution to road safety. In recent years, technological developments and the increasing demand for road safety have resulted in the integration and cooperation of these individual active safety systems. Traction control system (TCS) is one of these individual systems, which is capable of inhibiting wheel-spin during acceleration of the vehicle on slippery surfaces. In this thesis, design methodology and simulation results of a traction co...
Design and simulation of a vapor compression refrigeration cycle for a micro refrigerator
Yıldız, Seyfettin; Okutucu Özyurt, Hanife Tuba; Department of Mechanical Engineering (2010)
Cooling of electronic equipments has become an important issue as the advances in technology enabled the fabrication of very small devices. The main challenge in cooling is the space limitation. The use of miniature refrigerators seems to be a solution alternative for the cooling problem. The objective of this study is to design and simulate a vapor compression refrigeration cycle for a micro-scale refrigerator. A MATLAB code is developed for the simulations. The four components of the refrigerator, namely,...
Citation Formats
B. Canpolat, “Design and simulation of an adaptive MLSE receiver for GSM system,” Middle East Technical University, 1994.