Effect of metallurgical factors on efficiency of aluminum-zinc-indium sacrificial anodes

Download

029243.pdf

Date

1993

Author

Safaei, Shahrokh

Metadata

Show full item record

Item Usage Stats

69
views

0
downloads

URI

https://hdl.handle.net/11511/10636

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Effect of compatibilizers on the gas separation performance of polycarbonate membranes Şen, Değer; Yılmaz, Levent; Kalıpçılar, Halil; Department of Chemical Engineering (2003) In this study, the effect of compatibilizers on the gas separation performance of polycarbonate (PC) membranes was investigated. Membranes were prepared by solvent evaporation method. They were characterized by single gas permeability measurements of O2, N2, H2 and CO2 as well as scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Fourier transform infrared spectrometry (FTIR). Membranes containing 0.5 to 10 w% p-nitroaniline (pNA) were prepared to study the effect of compatibili...
Effect of High-Density Nanoparticles on Recrystallization and Texture Evolution in Ferritic Alloys Aydoğan Güngör, Eda; Carvajal-Nunez, Ursula; Vogel, Sven C.; Li, Meimei; Maloy, Stuart A. (MDPI AG, 2019-03-01) Ferritic alloys are important for nuclear reactor applications due to their microstructural stability, corrosion resistance, and favorable mechanical properties. Nanostructured ferritic alloys having a high density of Y-Ti-O rich nano-oxides (NOs < 5 nm) are found to be extremely stable at high temperatures up to similar to 1100 degrees C. This study serves to understand the effect of a high density of nano-particles on texture evolution and recrystallization mechanisms in ferritic alloys of 14YWT (14Cr-3W-...
Effect of excess air on the optimization of heating appliances for biomass combustion Menghini, D.; Marra, F. S.; Allouis, Christophe Gerard; Beretta, F. (2008-07-01) The performance of a domestic appliance for wood logs combustion is a function of several variables, such as the geometric design of the appliance and its operating parameters. Among them, air feeding conditions are really decisive if the objective function is the maximization of the heat recovered from flue gases. Therefore, even if pollutant emissions have to be ever considered, the amount of excess air can be seen as a fundamental parameter in the definition of thermal efficiency of the appliance.
Effect of geofoam location and density on the improvement of buried flexible pipe Söylemez, Berkan; Huvaj Sarıhan, Nejan (2018-09-16) In this study, the effects of geofoam location and density for buried pipelines is investigated in laboratory physical model tests. Experiments are conducted in a box having 1 m x 1 m area and 0.6 m height, where a clean sand is used as the bedding and surrounding material. A 20-cm-diameter PVC pipe is positioned on a 10-cm-thick bedding soil layer, and above the pipe EPS geofoam plates with two different densities are placed with varying distances from the pipe crown (0, 5 and 10 cm above the crown). Incre...
Effect of biogenic substrate concentration on the performance of sequencing batch reactor treating 4 CP and 2 4 DCP mixtures ŞAHİNKAYA, ERKAN; Dilek, Filiz Bengü (Elsevier BV, 2006-03-01) Effect of a biogenic substrate (peptone) concentration on the performance of sequencing batch reactor (SBR) treating 220 mg/l 4-chlorophenol (4-CP) and 110 mg/l 2,4-dichlorophenol (2,4-DCP) mixtures was investigated. In this context, peptone concentration was gradually decreased from 300 mg/l to null in which chlorophenols were fed to the reactor as sole carbon and energy sources. By this way, the effect of peptone concentration on observed yield coefficient (Y), biomass concentration, chlorophenols and COD...

Citation Formats

S. Safaei, “Effect of metallurgical factors on efficiency of aluminum-zinc-indium sacrificial anodes,” Middle East Technical University, 1993.