Impact response of fiber reinforced composite pipes

Download
1997
Ersan, Şevket Erhan

Suggestions

IMPACT ASSESSMENT OF WATER JETS FROM FLIP BUCKETS
Yavuz, Cuneyt; Aydın, İsmail (2015-07-03)
A jet issued from flip bucket of spillway of a dam interacts with the surrounding air and develops into an aerated turbulent jet. Depending on the relative jet thickness, the fall height and the level of turbulence, the jet may be dispersed in air forming an aerated water body which will eventually plunge into the river surface at sufficiently far downstream of the flip bucket. If not aerated, the jet may have a larger impact on the river bed causing severe scour damage. Water cushion and dispersion of jet ...
Impact assessment of water jets from flip buckets /
Yavuz, Cüneyt; Aydın, İsmail; Department of Civil Engineering (2014)
A jet issued from flip bucket of spillway of a dam interacts with the surrounding air and develops into an aerated turbulent jet. Depending on the relative jet thickness, the fall height and the level of turbulence, the jet may be dispersed in air forming an aerated water body which will eventually plunge into the river surface at sufficiently far downstream of the flip bucket. If not aerated, the jet may have a larger impact on the river bed causing severe scour damage. Water cushion and dispersion of jet ...
Stress corrosion cracking behaviour of aluminum brass condenses tubes in ammoniacal copper solution.
Gürmükçüoğlu, Murat; Department of Chemical Engineering (1975)
Fatigue performance of engineered cementitious composites
Aleessa Alam, Burhan; Yaman, İsmail Özgür; Department of Civil Engineering (2016)
The maintenance and rehabilitation of a pavement during its service life is as much important as the construction works of this pavement. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level of the pavement, there are many different methods that can be used to repair the pavement. The use of an overlay is one of the most common methods, where a new layer can be applied directly over or replace the top part of an ...
Fatigue behavior of aluminum matrix SiC particulate reinforced composites
Boylu, Kadir Süha; Kaynak, Cevdet; Kalkanlı, Ali; Department of Metallurgical and Materials Engineering (2001)
Citation Formats
Ş. E. Ersan, “Impact response of fiber reinforced composite pipes,” Middle East Technical University, 1997.