Stress corrosion cracking(SCC) on an al-li alloy.

1985
Abu-Al-Rub, Mohammad

Suggestions

Stress corrosion cracking behaviour of aluminum brass condenses tubes in ammoniacal copper solution.
Gürmükçüoğlu, Murat; Department of Chemical Engineering (1975)
Stress corrosion cracking of alpha - beta brass in ammoniacal copper sulphate solutions /
Paya, Ali Süha; Department of Chemical Engineering (1972)
Stress Scaling Factors for Seismic Soil Liquefaction Engineering Problems: A Performance-Based Approach
Çetin, Kemal Önder; Bilge, Habib Tolga (2013-06-19)
Most of the widely used seismic soil liquefaction triggering methods propose cyclic resistance ratio (CRR) values valid at the reference normal effective stress (sigma(v,0)') of one atmosphere and zero static shear stress (tau(st,0)) states. Then, a series of correction factors are applied on this reference CRR, for the purpose of assessing the variability due to normal effective and static shear stress states (i.e. K-sigma and K-alpha corrections) acting on the horizontal plane. In the literature, a number...
Stress analysis of symmetric aluminum composite-laminated beams under a bending moment: Materially nonlinear only
Sayman, O; Belevi, M; Altinhan, M (SAGE Publications, 2005-01-01)
In this study, an elastic-plastic stress analysis is carried out on symmetric laminated composite beams subjected to a bending moment. The composite beam is to be strain hardening. The Bernoulli and Euler hypotheses are assumed to be valid. The Tsai-Hill theory is used as a yield criterion in the solution. The solution is carried out for (90 degrees/0 degrees)(2), (30 degrees/-30 degrees)(2), (45 degrees/-45 degrees)(2), and (60 degrees/-60 degrees)(2) orientations. The bending moment is to be found the hig...
Stress strain behaviour of structural lightweight concrete under confinement
Şenel, Mehmet Ali; Tasbahjı, Tayseer; Turanlı, Lutfullah; Sarıtaş, Afşin (null; 2015-12-11)
: In this study, stress-strain behavior of structural lightweight concrete is studied under unconfined and confined conditions. To this end, the use of naturally occurring perlite material as lightweight aggregate and cement replacement material is considered. Although there are several studies on the confinement effects on normal weight concrete, there is lack of data on the confinement behavior attained for structural lightweight concrete by spiral or stirrup reinforcement. In order to evaluate the perfor...
Citation Formats
M. Abu-Al-Rub, “Stress corrosion cracking(SCC) on an al-li alloy.,” Middle East Technical University, 1985.