Corrosion protection in industrial steel structures

Download
068386.pdf
1997
Tayanç, Neslihan
Show full item record
151
views
0
downloads
https://hdl.handle.net/11511/1115
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Corrosion Behavior and Cathodic Protection Modeling of a Selected Steel Component in Seawater
Aksu, Rauf; Erdoğan, Metehan; Meço, Halim; Karakaya, İshak (null; 2016-11-01)
Corrosion is a material deterioration process due to chemical interactions with surrounding environment. Metallic components of amphibious vehicles are exposed to aggressive species such as chlorine in marine environment. These components must be coated or well protected to inhibit corrosion. Peeling and cracked paint on the surfaces of the vehicle hulls may result in undesired chemical interactions on damaged areas. Cathodic protection application with sacrificial anodes is an effective solution to corrosi...
Corrosion Resistance Studies of Austenitic Stainless Steel Grades in Molten Zinc-Aluminum Alloy Galvanizing Bath
Loto, Roland Tolulope; Ozcan, Emre (Springer Science and Business Media LLC, 2016-06-01)
The corrosion inhibition performance and mechanical behavior of galvanized and heat-treated four newly developed austenitic stainless steel grades and type 316L austenitic stainless steel for application as sink rolls in galvanizing baths of 0.14-0.21 wt.% aluminum was investigated and compared through immersion corrosion test to determine the weight loss between 168 and 504 h, tensile test, and Charpy impact test. The delta ferrite content of the test samples was observed and estimated through optical micr...
Corrosion behaviours of Ti6Al4V-Mg/Mg-Alloy composites
ESEN, ZİYA; Ocala, Ezgi Butev; Akkaya, Asli; Gurcay, Bensu; Ozcan, Ceren; Ozgumus, Burcu Asli; Duygulu, Ozgur; Dericioğlu, Arcan Fehmi (Elsevier BV, 2020-04-15)
The effect of coupling of unalloyed Mg and Mg-alloys (AZ91 and WE43) with Ti6Al4V alloy on corrosion and degradation behaviours of produced composites has been investigated in simulated body fluid (SBF) by hydrogen evolution, and surface and electrochemical characterization techniques. Combining of unalloyed Mg with Ti6Al4V intensified galvanic corrosion and catastrophic failure occurred by initiation of microcracks formed by sudden hydrogen gas evolution. In contrast to other composites, Ti6Al4V-AZ91 compo...
Corrosion Resistance and Cytocompatibility of Magnesium-Calcium Alloys Modified with Zinc- or Gallium-Doped Calcium Phosphate Coatings
TAMAY, DİLARA GÖKSU; Gokyer, Seyda; Schmidt, Jurgen; Vladescu, Alina; HURİ, PINAR; Hasırcı, Vasıf Nejat; Hasırcı, Nesrin (2022-01-12)
In orthopedic surgery, metals are preferred to support or treat damaged bones due to their high mechanical strength. However, the necessity for a second surgery for implant removal after healing creates problems. Therefore, biodegradable metals, especially magnesium (Mg), gained importance, although their extreme susceptibility to galvanic corrosion limits their applications. The focus of this study was to control the corrosion of Mg and enhance its biocompatibility. For this purpose, surfaces of magnesium-...
Corrosion Fatigue of Carbon- and Stainless Steels after Laser Hardening
Pokhmurska, Anna; Pokhmurskii, Vasily; Kaminskii, Oleg; Mehrabov, Amdulla (null; 2000-03-19)
Citation Formats
N. Tayanç, “Corrosion protection in industrial steel structures,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr