Design of reactive power compensator and its filter reactor

Download
068778.pdf
1997
Eliş, Gülfidan
Show full item record
102
views
0
downloads
https://hdl.handle.net/11511/11232
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design of a slotted waveguide array antenna and its feed system
Top, Can Barış; Hızal, Altunkan; Department of Electrical and Electronics Engineering (2006)
Slotted waveguide array (SWGA) antennas find application in systems which require planarity, low profile, high power handling capabilities such as radars. In this thesis, a planar, low sidelobe, phased array antenna, capable of electronically beam scanning in E-plane is designed, manufactured and measured. In the design, slot characterization is done with HFSS and by measurements, and mutual coupling between slots are calculated analytically. A MATLAB code is developed for the synthesis of the SWGA antenna....
Design of log-periodic dipole array feed and wide band reflector antenna system
Tanyer, Fatma Müge; Tanyer, Fatma Müge; Department of Electrical and Electronics Engineering (2005)
The introduction of broadband systems to communication and radar technologies has demanded the design of broadband antennas. In this thesis, broadband log-periodic dipole antennas and reflector antennas are investigated. A dual polarized log-periodic dipole antenna and a reflector antenna are designed and analyzed within the frequency band of 0.4-18 GHz. Basic theory and calculations about mutual coupling between the linear antenna elements are given. The currents at the bases of dipoles of the log-periodic...
Design of series-fed printed slot antenna arrays excited by microstrip lines
İncebacak, Mustafa; Alatan, Lale; Department of Electrical and Electronics Engineering (2010)
Series-fed printed slot antenna arrays excited by microstrip lines are low profile, easy to manufacture, low cost structures that found use in applications that doesn’t require high power levels with having advantage of easy integration with microwave front-end circuitry. In this thesis, design and analysis of microstrip line fed slot antenna arrays are investigated. First an equivalent circuit model that ignores mutual coupling effects between slots is studied. A 6-element array is designed by using this e...
Design of front -end LNA, T/R switch and power amplifier of DECT wireless communication system
Üstüner, Fatih; Günalp, Nilgün; Department of Electrical and Electronics Engineering (1994)
Design of magneto-electric dipole antenna for wideband communication systems
Alparslan, Semih; Alatan, Lale; Department of Electrical and Electronics Engineering (2018)
This thesis includes the design, simulation, production and measurement of a differential fed magneto-electric dipole antenna with cavity operating at ultrawideband (3.3 GHz – 10 GHz). This antenna consists of a differential feeding structure, an electric dipole, a magnetic dipole and a cavity. The ultra-wideband operation is achieved through the use of differential feeding structure and cavity. A step-by-step procedure is followed during the design process of the differential fed magneto-electric dipole an...
Citation Formats
G. Eliş, “Design of reactive power compensator and its filter reactor,” Middle East Technical University, 1997.
METU IIS - Integrated Information Service open@metu.edu.tr