Design and construction of high voltage charging and triggering systems for tea CO2 lasers

Download
116210.pdf
2001
Yıldız, İlker
Show full item record
119
views
0
downloads
https://hdl.handle.net/11511/11445
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Design and construction of high power transformers, combiners and parellel-combined HF power amplifiers
Altun, Altuğ; Ergül, Rüyal; Yıldırım, Nevzat; Department of Electrical and Electronics Engineering (1998)
Design and construction of pulse generation and signal processing units for deep level transient spectroscopy studies
Soydan, Ünal; Sarıtaş, Müzeyyen; Department of Electrical and Electronics Engineering (1989)
Design and construction of a microwave plasma ion source
Çınar, Kamil; Bilikmen, Kadri Sinan; Department of Physics (2011)
This thesis is about the designing and constructing a microwave ion source. The ions are generated in a thermal and dense hydrogen plasma by microwave induction. The plasma is generated by using a microwave source with a frequency of 2.45 GHz and a power of 700 W. The generated microwave is pulsing with a frequency of 50 Hz. The designed and constructed microwave system generates hydrogen plasma in a pyrex plasma chamber. Moreover, an ion extraction unit is designed and constructed in order to extract the i...
Design and implementation of a 200w microinverter for grid connected photovoltaic energy conversion system
Kavurucu, Semih; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2014)
As one type of the grid-connected photovoltaic energy conversion systems, micro-inverters (MI, also known as Module Integrated Inverters, MII) are typically designed for residential applications with energy capacities of 3-5 kW and less, in order to provide PV module level energy generation, plug-N-play operation, minimization of the shading effects occurring on the PV module, and flexibility of installation. For the micro-inverter system which can be designed employing variety of topologies, interleaving f...
Design and analysis of tubular photobioreactors for biohydrogen production
Kayahan, Emine; Eroğlu, İnci; Koku, Harun; Department of Chemical Engineering (2015)
Hydrogen can be produced sustainably by utilizing organic wastes through photofermentation. In order to obtain an economically feasible operation, the photobioreactor design is of crucial importance. An optimal photobioreactor design should provide uniform velocity and light distribution, low pressure drop, low gas permeability and efficient gas-liquid separation. The aim of this study was to design a pilot-scale photobioreactor satisfying these criteria and to test the reactor under outdoor conditions with...
Citation Formats
İ. Yıldız, “Design and construction of high voltage charging and triggering systems for tea CO2 lasers,” Middle East Technical University, 2001.
METU IIS - Integrated Information Service open@metu.edu.tr