Experimental and analytical investigation of e-glass/epoxy tubes subjected to compression

Download

068543.pdf

Date

1997

Author

Yetmez, Mehmet

Metadata

Show full item record

Item Usage Stats

56
views

0
downloads

URI

https://hdl.handle.net/11511/1160

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Experimental and numerical investigation of mechanical properties of additively manufactured auxetic structures Taşdemir, Mehmet; Evis, Zafer; Department of Engineering Sciences (2022-8) In this thesis, two novel unit cell designs were constituted by combining different auxetic structures in literature, and they were produced via the 3D printers, which is one of the most popular additive manufacturing methods nowadays. Based on the unit cells produced with various parameters, tensile and compression samples were manufactured and the mechanical properties of auxetic structures and their feasibility in the field of additive manufacturing were investigated. Although polymer-based materials are...
Experimental and numerical investigation of coaxial pressure swirl injectors Baran, Onur.; Özyörük, Yusuf; Department of Aerospace Engineering (2019) Experimental and numerical investigations were carried out for determining spray characteristics of a liquid-liquid coaxial injector in this work. As a baseline injector, the RD-0110 rocket engine injector was chosen which consists of two coaxial atomizers. The inner atomizer is an open-end type pressure swirl atomizer which supplies oxidizer, whereas the outer one is a closed-end type pressure swirl atomizer which supplies fuel. Tests were carried out for two different recess lengths and various mass flow ...
Experimental and numerical investigation of pressure swirl atomizers Sümer, Bülent; Tuncer, İsmail Hakkı; Uzol, Oğuz; Department of Aerospace Engineering (2014) In this study, unsteady flows inside a pressure swirl atomizer are investigated using experimental and numerical techniques. High Speed Shadowgraphy Technique is used in order to visualize the flow structures inside the atomizer and the resulting spray at high temporal and spatial resolutions. The images of the air core inside the pressure swirl atomizer and the resulting spray formations are captured at four di erent water flow rates. Then, the time variation of the air core diameter at di erent axial loca...
Experimental and analytical analysis of in situ combustion processes Aybak, Tuğrul; Bağcı, Ali Suat; Department of Petroleum Engineering (1992)
Experimental and numerical investigation of a pressure swirl atomizer Sumer, B.; Erkan, N.; Uzol, Oğuz; Tuncer, İsmail Hakkı (2012-01-01) © ICLASS 2012 - 12th Inte. Con. on Liquid Atom. and Spray Systems. All rights reserved.The flow structure inside a pressure swirl atomizer is investigated using high-speed shadowgraphy techniques and computational fluid dynamics tools. The hollow cone spray properties are detected using Phase Doppler Particle Analyzer. The experimental and numerical results are analyzed and compared. The aircore inside the pressure swirl atomizer is visualized at high temporal and spatial resolutions with the high-speed sha...

Citation Formats

M. Yetmez, “Experimental and analytical investigation of e-glass/epoxy tubes subjected to compression,” Middle East Technical University, 1997.