Desing of a testability improved multi-processor step motor controller system.

Download

023578.pdf

Date

1992

Author

Aydın, Kubilay Kaan

Metadata

Show full item record

Item Usage Stats

53
views

0
downloads

URI

https://hdl.handle.net/11511/11813

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Desing and construction of temperature measurement and control device up to 1200 C Güler, Nihal Fatma; Sarıtaş, Müzeyyen; Department of Electrical and Electronics Engineering (1985)
Desing, manufacture and experimental evaluation of a wind tunnel balance Toksoy, Selil; Kavsaoğlu, Mehmet Ş.; Department of Aeronautical Engineering (1990)
Desing of an engine mount with dry friction damping Boral, Caner; Ciğeroğlu, Ender; Department of Mechanical Engineering (2010) Automotive engine mounts are used to support engine weight, protect engine from road inputs and isolate transmission of vibrations created by the engine, which has a drastic effect on the noise generated inside the passenger cabin. Most common types of engine mounts are elastomeric and hydraulic mounts, the former having better vibration isolation characteristics whereas the latter displays better shock isolation. Elastomeric mounts are widely used for their low initial cost, while hydraulic mounts with ine...
Planing a quality system for high voltage testing laboratories Çetin, Fatih; Arıkan, Yıldız; Department of Electrical and Electronics Engineering (1999)
Deriving strategy and developing balanced scorecard for General Directorate of Environmental Impact Assessment and Planning in the Ministry of Environment and Forestry Özcan, Mehmet; Saatçioğlu, Ömer; Department of Industrial Engineering (2003) In this study, it is aimed to derive strategies and develop a Balanced Scorecard in General Directorate of Environmental Impact Assessment and Planning in Ministry of Environment and Forestry. Firstly, the objectives of the General Directorate defined in the law are reassessed and strategies to realize the objectives are derived by making use of feedback received by conducting surveys to 4 main stakeholder groups which are the staff of the General Directorate, Provincial Directorates, companies preparing EI...

Citation Formats

K. K. Aydın, “Desing of a testability improved multi-processor step motor controller system.,” Middle East Technical University, 1992.